iConverter T1/E1

T1/E1 Managed Media Converter

iConverter T1/E1
Application diagram

 

PDF_014_36x36.jpgadatlap

Jellemzők

  • T1/E1 RJ48 or coaxial to fiber media converter
  • Supports multimode, single-mode and single-fiber with ST, SC, LC and MT-RJ connectors
  • Supports Small Form Pluggable (SFP) transceivers with standard and CWDM wavelengths
  • Supports SFP Digital Diagnostic Monitoring Interface (DDMI) bus
  • The RJ48 port DCE/DTE switch facilitates connectivity to devices such as PBXs and CSUs
  • User-selectable Local Loopback, Force 1s to Copper, Force 1s to Fiber and Fiber Test modes
  • Supports AMI, B8ZS and HDB3 modes
  • Management is available with the addition of a management module to the chassis
  • SNMP management via NetOutlook® provides realtime port and module information, remote parameter configuration and trap notification
  • Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
  • LED displays for immediate visual status of each port
  • Conforms to ANSI, AT&T, ETSI and ITU specifications
  • Lifetime Warranty and free 24/7 Technical Support

Alkalmazás

The iConverter T1/E1 media converter provides a cost-effective solution for extending telecom demarcation points. A pair of T1/E1 converters is used to extend the demarcation between buildings via fiber. Multimode or single-mode fiber can be used, and fiber links can be extended up to 60km using single-mode fiber.

The iConverter T1/E1 media converter provides standard T1 (1.544Mbps) or E1 (2.048Mbps) copper-to-fiber conversion and can be used to extend the demarcation point between service provider and networking equipment. T1/E1 media converters operate in pairs, extending distances over fiber, which improves noise immunity, quality of service, intrusion protection and network security.

The T1/E1 supports Small Form Pluggable (SFP) transceivers, enabling adaptability to different fiber types, distances and wavelengths, providing maximum flexibility across a variety of network architectures and topologies. Support for SFP transceivers increases the bandwidth capacity of fiber access infrastructure by incorporating Coarse Wave Division Multiplexing (CWDM) technology. CWDM SFPs provide wavelength conversion enabling multiplexing of up to 16 wavelengths on the same fiber pair. The same media converter can utilize a variety of SFPs for different wavelengths and distances, reducing costs and simplifying inventories.

The T1/E1 also supports a variety of fixed fiber connectors for multimode, single-mode and single-mode single-fiber.

Designed as a transparent repeater, the iConverter T1/E1 supports standard T1, E1 and Primary Rate Interface (PRI), voice or data. The converter also supports AMI, B8ZS and HDB3 line codes. DIP-switches provide easy configuration of T1/E1 line codes and line build-out.

The iConverter T1/E1 features user-selectable Local Loopback, Force 1s to Copper, Force 1s to Fiber, and Fiber Optic Test modes to facilitate diagnosis of the remote unit, eliminating the cost of external hardware or support personnel at each end of a link.

The copper interface features an RJ48 connector for balanced T1/E1 applications, and models featuring coaxial BNC connectors are available for unbalanced E1 applications.

The iConverter T1/E1 is available as a compact, unmanaged standalone unit with an RJ48 interface or as a chassis managed plug-in module with RJ48 or coax interface. The hot-swappable plug-in module can be mounted in a 19-Module (2U high) or 5- Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. It can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.

As a standalone unit, the T1/E1 is available as a wall-mount unit. The wall-mount models are DC powered and are available with an external AC/DC power adapter or a terminal connector for DC power.

View an Application Example

Paraméterek

Model Type T1/E1
Protocols ANSI: T1.403, T1.102AT&T: T62411ITU: G.703, G.704, G.706, G.736, G.755, G.823ETSI: ETS 300 166
Connectors and Cables Coax:Twisted Pair:Fiber:Multimode:Single-mode: BNC, 75 Ohm E1RJ45/RJ48, 100 Ohm T1/120 Ohm E1
(Active Pairs are Pins 1 , 2 and 4 , 5)SC or ST50/125, 62.5/125, 100/140mm9/125mm
Fiber Connectors SFP:Dual Fiber:Single-Fiber: LCSC, ST, LC, MT-RJSC
Controls UTP Crossover, Cable Type / Distance, Loop, Fiber AIS, UTP AIS, Fiber Optic Test
LED Displays Power, Test, RJ-45/RJ-48 Link, Fiber Optic Link
DC Power Connector Plug-in:Standalone: 0.7A @ 3.3VDC (typical)5 - 32VDC
0.3A @ 9VDC
AC Power Adapter [US] Plug-in:Standalone: N/A100 - 120VAC/60Hz
0.05A @ 120VAC
AC Power Adapter [Universal] Plug-in:Standalone: N/A100 - 240VAC/50 to 60Hz
0.05A @ 120VAC
Dimensions Plug-in:Standalone: W 0.85” x D 4.5” x H 2.8”W 3.8” x D 4.8” x H 1.0”
Weight Plug-in:Standalone 8 oz.1.0 lb..
Compliance UL, CE, FCC Class A
Temperature Standard:Wide:Extended:Storage: 0 to 50º C-40 to 60º C-40 to 75º C-40 to 80º C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4000m
MTBF (hrs) Plug-in:Standalone without power adapterStandalone with US Power Adapter:Standalone with Universal Adapter: 580,000590,000250,000100,000

T1-E1_M_011_660x304.jpg

Standalone Module Model Numbers

Model TypeFiber TypeDistanceConnector TypesTx λ (nm)Rx λ (nm)Min.
Tx Power (dBm)
Max.
Tx Power (dBm)
Min.
Rx Sense (dBm)
Max.
Rx Sense (dBm)
Link Budget
(dBm)
STSCMT-RJLCSFP**
T1/E1 Copper RJ-48 Dual Fiber - - - - - - 8719-0-x - - - - - - -
MM 5km 8700-0-x 8702-0-x 8704-0-x 8706-0-x - 1310 1310 -23 -12 -31 -12 8
SM 30km 8701-1-x 8703-1-x 8705-1-x 8707-1-x - 1310 1310 -15 -8 -31 -8 16
SM 60km 8701-2-x 8703-2-x - 8707-2-x - 1310 1310 -5 0 -31 -3* 26
SM 120km - 8703-3-x - 8707-3-x - 1550 1550 -5 0 -31 -3* 26
T1/E1 Copper RJ-48 Single-Fiber SM 20km - 8710-1-x - - - 1310 1550 -15 -5 -30 -3 15
SM 40km - 8710-2-x - - - 1310 1550 -8 0 -30 -3* 22
SM 20km - 8711-1-x - - - 1550 1310 -15 -5 -30 -3 15
SM 40km - 8711-2-x - - - 1550 1310 -8 0 -30 -3* 22

 

Plug-in Module Model Numbers

Model TypeFiber TypeDistanceConnector TypesTx λ (nm)Rx λ (nm)Min.
Tx Power (dBm)
Max.
Tx Power (dBm)
Min.
Rx Sense (dBm)
Max.
Rx Sense (dBm)
Link Budget
(dBm)
STSCMT-RJLCSFP
T1/E1 Copper RJ-48 Dual Fiber - - - - - - 8719-0** - - - - - - -
MM 5km 8700-0 8702-0 8704-0 8706-0 - 1310 1310 -23 -12 -31 -12 8
SM 30km 8701-1 8703-1 8705-1 8707-1 - 1310 1310 -15 -8 -31 -8 16
SM 60km 8701-2 8703-2 - 8707-2 - 1310 1310 -5 0 -31 -3* 26
SM 120km - 8703-3 - 8707-3 - 1550 1550 -5 0 -31 -3* 26
T1/E1 Coax + RJ-48 Dual Fiber
(2-slot module)
- - - - - - 8739-0** - - - - - - -
MM 5km 8720-0 8722-0 8724-0 8726-0 - 1310 1310 -23 -12 -31 -12 8
SM 30km 8721-1 8723-1 8725-1 8727-1 - 1310 1310 -15 -8 -31 -8 16
SM 60km 8721-2 8723-2 - 8727-2 - 1310 1310 -5 0 -31 -3* 26
SM 120km - 8723-3 - 8727-3 - 1550 1550 -5 0 -31 -3* 26
T1/E1 Copper RJ-48 Single-Fiber SM 20km - 8710-1 - - - 1310 1550 -15 -5 -30 -3 15
SM 40km - 8710-2 - - - 1310 1550 -8 0 -30 -3* 22
SM 20km - 8711-1 - - - 1550 1310 -15 -5 -30 -3 15
SM 40km - 8711-2 - - - 1550 1310 -8 0 -30 -3* 22
T1/E1 Coax + RJ-48 Single-Fiber
(2-slot module)
SM 20km - 8730-1 - - - 1310 1550 -15 -5 -30 -3 15
SM 40km - 8730-2 - - - 1310 1550 -8 0 -30 -3* 22
SM 20km - 8731-1 - - - 1550 1310 -15 -5 -30 -3 15
SM 40km - 8731-2 - - - 1550 1310 -8 0 -30 -3* 22

 

Chassis and Mounting Options Ordering Table

 19-Module5-Module2-Module1-Module
ConfigurationAC
(60 watts)
AC
(120 watts)
24VDC48VDCAC24VDC48VDCAC18-60DCUS ACUNIV AC
One (1) Power Supply 8200-1 8201-1 8206-1 8205-1 8220-1 8226-1 8225-1 8230-0 8235-0 8240-1 8240-2
One (1) Power Supply with Dying Gasp Support - - - - - - - 8230-1 8235-1 8241-1 8241-2
Two (2) Power Supplies 8200-2 8201-2 8206-2 8205-2 8220-2 8226-2 8225-2 - - 8245-111* 8245-112*
Three (3) Power Supplies 8200-3 8201-3 8206-3 8205-3 - - - - - - -
Spare Power Supply 8200-9 8201-9 8206-9 8205-9 8220-9 8226-9 8225-9 - - - -
23" Rack Mounting Kit 8091-2 8091-2 8091-2 8091-2 8092-2 8092-2 8092-2 - - - -
Blank Module Panel 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 - -
Wall Mounting Hardware Kit -   - - - - - 8249-0 8249-0 8249-0 8249-0
1U 19" Rack Mount Shelf - - - - - - - 8260-0 8260-0 8260-0 8260-0
DIN Rail Mounting Kit -   - - - - - - - 8250-0 8250-0

 
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet