iConverter GX/T

10/100/1000BASE-T UTP to 1000BASE-X Managed Ethernet Media Converter

iConverter GX/T

 

PDF_014_36x36.jpgadatlap

Jellemzők

  • 10/100/1000 UTP to Gigabit fiber media converter
  • Conforms to 10BASE-T, 100BASE-TX, 1000BASE-T and 1000BASE-X specifications
  • Supports VLANs, Port Access Control and MIB statistics
  • Fiber port supports multimode, single-mode, and single-fiber with SC, LC and MT-RJ connectors
  • UTP port supports 10/100/1000 and Half/Full-Duplex auto-negotiation
  • Ethernet backplane ports for connectivity to adjacent modules
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
  • Management is available with the addition of a management module to the chassis
  • SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
  • Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
  • Lifetime Warranty and free 24/7 Technical Support

Alkalmazás

The iConverter GX/T media converters are members of the modular iConverter product family. The GX/T provides 10/100/1000 UTP copper to GigE fiber conversion and can be used in a managed or unmanaged fashion.

The GX/T is ideal in network core or Central Office (CO) applications when conversion is required from a 10/100/1000 core switch to GigE fiber, and in edge applications when the GigE fiber is converted back into 10/100/1000 copper and delivered to a departmental or Customer Premise (CPE) switch.

The fiber port of the GX/T is available with multimode, single-mode and single-fiber and supports SC, MT-RJ and LC connectors.

The UTP port supports 10/100/1000 and Half/Full-Duplex auto-negotiation with both hardware and software manual override controls.

The GX/T features two 10/100 Ethernet backplane ports to provide connectivity to adjacent modules for network expansion and for in-band connectivity to an iConverter Network Management Module (NMM2).

Advanced features include VLAN, which allows network managers control the traffic flow between the UTP, fiber and backplane ports to enhance security, and Port Access Control, which provides the ability to enable or disable individual ports to control delivery of services to customers. The GX/T also supports port level MIB statistics reporting a real-time packet statistics to provide performance and operational monitoring.

The GX/T features user-selectable Link Propagate, Link Segment, Remote Fault Detection and Symmetrical Fault Detection modes to facilitate quick fault detection, isolation and reporting.

iConverter GX/T modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.

Paraméterek

Model Type GX/T
Protocols 10BASE-T, 100BASE-TX,
1000BASE-T, 1000BASE-SX/LX
UTP Connectors RJ-45
Fiber Connectors SC, MT-RJ, LC, Single-Fiber SC
Controls BP Enable, X-Over, LS/LP, RFD, SFD, UTP Auto/Man, 10/100/1000, UTP FDX/HDX, F/O Auto/Man
LED Displays Power, FO link, UTP link, Auto, FDX/HDX, 10/100/1000
Dimensions W:0.85" x D:4.5" x H:2.8"
Weight 8 oz.
Compliance UL, CE, FCC Class A
Power Requirement 1.4A @ 3.3VDC (typical)
Temperature Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4000m
MTBF (hrs) 830,000
Model TypeFiber TypeDistancesConnector TypeTx λ (nm)Rx λ (nm)Min.
Tx Power (dBm)
Max.
Tx Power (dBm)
Min.
Rx Sense (dBm)
Max.
Rx Sense (dBm)
Link Budget
(dBm)
SCMT-RJLC
GX/T
Dual Fiber
MM/DF 220/550m1 8522-0 8524-0 8526-0 850 850 -10 -4 -17 -3 7
SM 12km 8523-1 8525-1 8527-1 1310 1310 -9.5 -3 -19.5 -3 10
SM 34km 8523-2 - 8527-2 1310 1310 -5 0 -23 -3* 18
SM 80km 8523-3 - 8527-3 1550 1550 -5 0 -23 -3* 18
GX/T Single- Fiber SM 20km 8530-1 - - 1310 1550 -9.5 -3 -20 -3 10.5
SM 20km 8531-1 - - 1550 1310 -9.5 -3 -20 -3 10.5
SM 40km 8530-2 - - 1310 1550 -3 0 -20 -3* 17
SM 40km 8531-2 - - 1550 1310 -3 0 -20 -3* 17

 
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.
1 62.5/125μm, 100/140μm multimode fiber up to 220m. 50/125μm multimode fiber up to 550m. Refer to the fiber cable manufacturer for multimode distance specifications.

Chassis and Mounting Options Ordering Table

 19-Module5-Module2-Module1-Module
ConfigurationAC
(60 watts)
AC
(120 watts)
24VDC48VDCAC24VDC48VDCAC18-60DCUS ACUNIV AC
One (1) Power Supply 8200-1 8201-1 8206-1 8205-1 8220-1 8226-1 8225-1 8230-0 8235-0 8240-1 8240-2
One (1) Power Supply with Dying Gasp Support - - - - - - - 8230-1 8235-1 8241-1 8241-2
Two (2) Power Supplies 8200-2 8201-2 8206-2 8205-2 8220-2 8226-2 8225-2 - - 8245-111* 8245-112*
Three (3) Power Supplies 8200-3 8201-3 8206-3 8205-3 - - - - - - -
Spare Power Supply 8200-9 8201-9 8206-9 8205-9 8220-9 8226-9 8225-9 - - - -
23" Rack Mounting Kit 8091-2 8091-2 8091-2 8091-2 8092-2 8092-2 8092-2 - - - -
Blank Module Panel 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 - -
Wall Mounting Hardware Kit -   - - - - - 8249-0 8249-0 8249-0 8249-0
1U 19" Rack Mount Shelf - - - - - - - 8260-0 8260-0 8260-0 8260-0
DIN Rail Mounting Kit -   - - - - - - - 8250-0 8250-0


When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet