iConverter OC3FF

Single-Mode to Multimode Managed
Fiber Converter

iConverter OC3FF

 

PDF_014_36x36.jpgadatlap

Jellemzők

  • OC-3 multimode to single-mode fiber converter
  • Supports multimode, single-mode, and single-fiber with SC and ST connectors
  • Supports distances up to 120km or longer*
  • Support for OC3 over ATM or SONET
  • SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
  • Management is available with the addition of a management module to the chassis
  • User-selectable link fault detection modes facilitate quick fault detection, isolation, and reporting
  • Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
  • LED displays for immediate visual status of each port
  • Lifetime Warranty and free 24/7 Technical Support

 

*Contact Omnitron

Alkalmazás

The iConverter OC3FF managed media converter provides multimode to single-mode and dual fiber to single fiber conversion, and is a cost-effective solution for extending fiber network distances.

iConverter OC3FF models are available with multimode, single-mode, and single-fiber options. The multimode fiber port supports ST or SC connectors and distances up to 5km. The single-mode fiber port supports ST or SC connectors and distances up to 120km.

User-selectable Link Propagate and Remote Fault Detection modes facilitate quick fault detection, isolation and reporting.

The iConverter OC3FF is available as a compact, unmanaged standalone unit, or as a chassis plug-in module that can be managed with a management module installed in the chassis. The hot-swappable plug-in module can be mounted in a high-density 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.

The standalone OC3FF can be wall-mounted and is DC powered. It can be ordered with an external AC/DC power adapter, or it can be directly powered using a 2-pin terminal connector.

Paraméterek

Model Type iConverter OC3FF
Protocols OC-3
Compliance UL, FCC Class A, CE, NEBS Level 3
Fiber Connectors SC, ST, Single-Fiber SC
Controls LP, RFD
LED Displays Power, FO link (2)
Dimensions Plug-in:
Standalone:
W 0.85” x D 4.5” x H 2.8”
W 3.8” x D 4.8” x H 1.0”
Weight Plug-in:
Standalone
without Power Adapter:
Standalone
with Power Adapter:
8 oz.

1.0 lb.

1.5 lb.
DC Power Connector Plug-in:
Standalone:
Power supplied by backplane
2.5mm Barrel Connector or 2 Pin Terminal Connector
DC Power Requirement (typical) Plug-in:
Standalone:
0.5A @ 3.3VDC
5 - 32VDC 0.3A @ 9VDC (1.0A max)
AC Power Adapter [US] Plug-in:
Standalone:
N/A
100 - 120VAC/60Hz 0.05A @ 120VAC
AC Power Adapter [Universal] Plug-in:
Standalone:
N/A
100 - 240VAC/50 to 60Hz 0.05A @ 120VAC
Temperature Standard:
Wide:
Storage:
Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4000m
MTBF (hrs) Plug-in:
Standalone
with US Power Adapter:
Standalone
with Universal Adapter:
1,600,000

250,000

100,000

OC3FF_011_670x266.jpg

PortConnector TypeFiber TypeDistanceWavelength [nm]Min. Tx Power (dBm)Max. Tx Power (dBm)Min. Rx Sensitivity (dBm)Max. Rx Sensitivity (dBm)Min. AttenuationLink Budget (dB)
ST/ST ST/SC (SF)SC/SC
SC/SC (SF)
Port 1 8660-1 8661-1 MM 5km 1310 -24 -14 -31 -14 - 7
Port 2 SM 30km 1310 -15 -8 -31 -8 - 16
Port 1 8660-2 8661-2 MM 5km 1310 -24 -14 -31 -14 - 7
Port 2 SM 60km 1310 -5 0 -31 -3 3 26
Port 1 - 8661-3 MM 5km 1310 -24 -14 -31 -14 - 7
Port 2 SM 120km 1550 -5 0 -31 -3 3 26
Port 1 - 8661-61 MM 2km 850 -10 -4 -24 -3 - 14
Port 2 SM 30km 1310 -15 -8 -31 -8 - 16
Port 1 8670-1 8674-1 MM 5km 1310 -24 -14 -31 -14 - 7
Port 2 SM / SF 20km Tx 1310
Rx 1550
-15 -5 -30 -3 - 15
Port 1 8671-1 8675-1 MM 5km 1310 -24 -14 -31 -14 - 7
Port 2 SM / SF 20km Tx 1550
Rx 1310
-15 -5 -30 -3 - 15
Port 1 8670-2 8674-2 MM 5km 1310 -24 -14 -31 -14 - 7
Port 2 SM / SF 40km Tx 1310
Rx 1550
-8 0 -30 -3 3 22
Port 1 8671-2 8675-2 MM 5km 1310 -24 -14 -31 -14 - 7
Port 2 SM / SF 40km Tx 1550
Rx 1310
-8 0 -30 -3 3 22
Port 1 8672-1 8676-1 SM 30km 1310 -15 -8 -31 -8 - 16
Port 2 SM / SF 20km Tx 1310
Rx 1550
-15 -5 -30 -3 - 15
Port 1 8673-1 8677-1 SM 30km 1310 -15 -8 -31 -8 - 16
Port 2 SM / SF 20km Tx 1550
Rx 1310
-15 -5 -30 -3 - 15
Port 1 8672-2 8676-2 SM 30km 1310 -15 -8 -31 -8 - 16
Port 2 SM / SF 40km Tx 1310
Rx 1550
-8 0 -30 -3 3 22
Port 1 8673-2 8677-2 SM 30km 1310 -15 -8 -31 -8 - 16
Port 2 SM / SF 40km Tx 1550
Rx 1310
-8 0 -30 -3 3 22

 
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.

Chassis and Mounting Options Ordering Table

 19-Module5-Module2-Module1-Module
ConfigurationAC
(60 watts)
AC
(120 watts)
24VDC48VDCAC24VDC48VDCAC18-60DCUS ACUNIV AC
One (1) Power Supply 8200-1 8201-1 8206-1 8205-1 8220-1 8226-1 8225-1 8230-0 8235-0 8240-1 8240-2
One (1) Power Supply with Dying Gasp Support - - - - - - - 8230-1 8235-1 8241-1 8241-2
Two (2) Power Supplies 8200-2 8201-2 8206-2 8205-2 8220-2 8226-2 8225-2 - - 8245-111* 8245-112*
Three (3) Power Supplies 8200-3 8201-3 8206-3 8205-3 - - - - - - -
Spare Power Supply 8200-9 8201-9 8206-9 8205-9 8220-9 8226-9 8225-9 - - - -
23" Rack Mounting Kit 8091-2 8091-2 8091-2 8091-2 8092-2 8092-2 8092-2 - - - -
Blank Module Panel 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 - -
Wall Mounting Hardware Kit -   - - - - - 8249-0 8249-0 8249-0 8249-0
1U 19" Rack Mount Shelf - - - - - - - 8260-0 8260-0 8260-0 8260-0
DIN Rail Mounting Kit -   - - - - - - - 8250-0 8250-0

 
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.