iConverter OC12FF

Multimode to Single-Mode Managed
Fiber Converter

 

PDF_014_36x36.jpgadatlap

Jellemzők

  • OC-12 multimode to single-mode fiber converter
  • Supports multimode, single-mode, and single-fiber with SC connectors
  • Supports distances up to 80km or longer*
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
  • Management is available with the addition of a management module to the chassis
  • SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
  • Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
  • LED displays for immediate visual status of each port
  • Lifetime Warranty and free 24/7 Technical Support

Alkalmazás

The iConverter OC12FF managed media converter provides multimode to single-mode and dual to single fiber conversion, and is a cost-effective solution for extending SONET/SDH network distances.

iConverter OC12FF models are available with multimode, single-mode, and single-fiber options. The single-mode fiber port supports SC connectors and distances up to 80km. The multimode fiber port supports SC connectors and distances up to 550m.

The iConverter OC12FF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.

The iConverter OC12FF is available as a compact, unmanaged standalone unit, or as a chassis plug-in module that can be managed with a management module installed in the chassis. The hot-swappable plug-in module can be mounted in a high-density 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.

The standalone OC12FF can be wall-mounted and is DC powered. It can be ordered with an external AC/DC power adapter, or it can be directly powered using a 2-pin terminal connector.

Paraméterek

Model Type iConverter OC12FF
Protocols OC-12, STM-4
Compliance UL, FCC Class A, CE, NEBS Level 3
Fiber Connectors SC, Single-Fiber SC
Controls LP, RFD
LED Displays Power, FO link (2)
Dimensions Plug-in:
Standalone:
W 0.85” x D 4.5” x H 2.8”
W 3.8” x D 4.8” x H 1.0”
Weight Plug-in:
Standalone
without Power Adapter:
Standalone
with Power Adapter:
8 oz.

1.0 lb.

1.5 lb.
DC Power Connector Plug-in:
Standalone:
Power supplied by backplane
2.5mm Barrel Connector or 2 Pin Terminal Connector
DC Power Requirement (typical) Plug-in:
Standalone:
0.5A @ 3.3VDC
5 - 32VDC 0.3A @ 9VDC (1.0A max)
AC Power Adapter [US] Plug-in:
Standalone:
N/A
100 - 120VAC/60Hz 0.05A @ 120VAC
AC Power Adapter [Universal] Plug-in:
Standalone:
N/A
100 - 240VAC/50 to 60Hz 0.05A @ 120VAC
Temperature Standard:
Wide:
Storage:
Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4000m
MTBF (hrs) Plug-in:
Standalone
with US Power Adapter:
Standalone
with Universal Adapter:
1,600,000

250,000

100,000

OC12FF_011_670x268.jpg

Model TypeFiber Type
(Port 1 / Port 2)
Distance Port 1Distance Port 2Connector TypeFiber Type

Port1
Port2
Tx λ (nm)Rx λ (nm)Min.
Tx Power (dBm)
Max.
Tx Power (dBm)
Min.
Rx Sense (dBm)
Max.
Rx Sense (dBm)
Link Budget
(dBm)
SC/SC
OC12FF Dual Fiber MM / SM 550m 12km 8681-1 MM 1310 1310 -20 -14 -26 -14 6
SM 1310 1310 -9.5 -3 -19.5 -3 10
MM / SM 550m 34km 8681-2 MM 1310 1310 -20 -14 -26 -14 6
SM 1310 1310 -5 0 -23 -3* 18
MM / SM 550m 80km 8681-3 MM 1310 1310 -20 -14 -26 -14 6
SM 1550 1550 -5 0 -23 -3* 18
OC12FF Single-Fiber MM / SM 550m 20km 8690-1 MM 1310 1310 -20 -14 -26 -14 6
SM 1310 1550 -9.5 -3 -20 -3 10.5
MM / SM 550m 20km 8691-1 MM 1310 1310 -20 -14 -26 -14 6
SM 1550 1310 -9.5 -3 -20 -3 10.5
SM / SM 12km 20km 8692-1 SM 1310 1310 -9.5 -3 -19.5 -3 10
SM 1310 1550 -9.5 -3 -20 -3 10.5
SM / SM 12km 20km 8693-1 SM 1310 1310 -9.5 -3 -19.5 -3 10
SM 1550 1310 -9.5 -3 -20 -3 10.5

 
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.

Chassis and Mounting Options Ordering Table

 19-Module5-Module2-Module1-Module
ConfigurationAC
(60 watts)
AC
(120 watts)
24VDC48VDCAC24VDC48VDCAC18-60DCUS ACUNIV AC
One (1) Power Supply 8200-1 8201-1 8206-1 8205-1 8220-1 8226-1 8225-1 8230-0 8235-0 8240-1 8240-2
One (1) Power Supply with Dying Gasp Support - - - - - - - 8230-1 8235-1 8241-1 8241-2
Two (2) Power Supplies 8200-2 8201-2 8206-2 8205-2 8220-2 8226-2 8225-2 - - 8245-111* 8245-112*
Three (3) Power Supplies 8200-3 8201-3 8206-3 8205-3 - - - - - - -
Spare Power Supply 8200-9 8201-9 8206-9 8205-9 8220-9 8226-9 8225-9 - - - -
23" Rack Mounting Kit 8091-2 8091-2 8091-2 8091-2 8092-2 8092-2 8092-2 - - - -
Blank Module Panel 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 - -
Wall Mounting Hardware Kit -   - - - - - 8249-0 8249-0 8249-0 8249-0
1U 19" Rack Mount Shelf - - - - - - - 8260-0 8260-0 8260-0 8260-0
DIN Rail Mounting Kit -   - - - - - - - 8250-0 8250-0

 
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.