EDFAs S-series
Jellemzők
- Bit-rate transparency
- High saturated output power up to 23dBm
- Wide operating wavelength range
- Exceptionally low noise figure
- Optically isolated input and output ports to minimize system susceptibility due to connector reflections
- Input and output signal monitoring
- Front panel LCD display and status LED indicators for quick access of unit’s status
- RS-232 or Ethernet interface for remote supervision.
- Redundant dual power supply
Alkalmazás
- Access, metro, and long-haul networks
- Single-channel and narrow-band networks
- Power compensation of OADM and OXC systems
- Booster and pre-amplifier amplification
GIP Technology S-series Erbium Doped Fiber Amplifiers (EDFAs) are designed for use in the single-channel applications. They amplify optical signals across the third or fourth telecommunication window. These series incorporate a special, unique, and flexible structure to produce maximum signal gain and saturated output power while minimizing noise figure. Through optimization of these important amplifier parameters, this module will be easily deployed into any of high-quality telecommunication platforms.
This model is offered as C-band in different configurations, booster, in-line or pre.
The compact rack-mounted unit serves the area size. In addition, these units also provide a user-friendly status monitoring via an LCD display, LED indicators, and various communication interfaces (RS-232 and SNMP).
Specifications
Optical Information | Unit | Description | ||
Booster | Pre | |||
Operating wavelength range | nm | 1528 ~ 1562 | ||
Input power range | dBm | -10 ~ +10 | -30 ~ -10 | |
Saturated output power*1 | Max. | dBm | 23 | 13 |
Signal gain | Typ. | dB | 25 | 30 |
Noise figure | Typ. | dB | 6 | 5.5 |
Polarization dependent gain | Max. | dB | 0.5 | |
Polarization mode dispersion | Max. | ps | 0.5 | |
Return loss | Min. | dB | 45 | |
Connector | SC or FC | |||
Electrical Information | ||||
Operating voltage | Volt | -48VDC and 100~240 VAC | ||
Pump LD ON/OFF switch | Key type | |||
Control interface | RS232 & SNMP | |||
Power consumption | Typ. | W | 30 | |
Environmental and Mechanical Information | ||||
Operating temperature | °C | 0 ~ 50 | ||
Storage temperature | °C | -20 ~ 80 | ||
Relative humidity (non-condense) | % | 5 ~ 85 | ||
Outline Information | ||||
Dimension | mm | 19” or 23” |
*1: Saturated power is composed of optical signal and ASE power.