EDFAs EFA-T series

Erbium-Doped Fiber Amplifiers
EFA-T series, (Combo Amplifier)

Jellemzők

  • Intermediate/Long distance extension
  • Input and output signal monitoring
  • Front panel LCD display or status LED indicators for quick access of unit’s status
  • RS-232 and Ethernet interface for local and remote supervision
  • Redundant dual power supply

Alkalmazás

  • Wavelength conversion and distance extension
  • Metropolitan WAN network
  • High speed network

GIP Technology Combo Amplifiers, Erbium-Doped Fiber Amplifiers plus Fiber Extender, are specially designed for wavelength conversion and distance extension on single mode fiber (SMF).   This series can receive the 100M~2.7G signals ranging from 1260 to 1620nm and convert/amplify to the Specified DWDM-ITU wavelength. This series incorporates a special, unique, and flexible structure to produce stable output power and low noise.  Through optimization of these important amplifier parameters, this module will be easily deployed into any of high-quality telecommunication platforms.

This model is offered as C-band version in the booster configuration.

The compact stand-alone type, it not only can be embedded in the EIA 19 and 23-inch cabinet rack, but also can be placed on the desk.

In addition, these units also provide a user-friendly status monitoring via an LCD display, LED indicators, and various communication interfaces (RS232 and SNMP).

Specifications

Optical Information Unit Description
Output
Operating wavelength nm 1530 ~ 1560, ITU grid
Channel spacing Hz 100G
Bit rate Typ. bps 100M ~ 2.7G
Saturated output power*1 dBm 13 ~ 17
Spectrum width (@-20dB width) Max. nm 0.3
Extinction ratio Min. dB 8.2
Dispersion tolerance*2 Typ. ps/nm 720 ~ 3600
Dispersion penalty Max. dB 3
Fiber type   Single mode
Connector   SC or FC
Input
Operating wavelength nm 1260 ~ 1620
Input power*3 dBm -13 ~ +2
Bit rate Typ. bps 100M ~ 2.7G
Fiber type   Single mode
Connector   SC or FC
Electrical Information
Power supply voltage Volt -48 Vdc and 100 ~ 240 Vac
Fan pcs 2
Pump LD ON/OFF switch   Key type
Power consumption Typ. W 10
Environmental Information
Operating temperature °C 0 ~ 50
Storage temperature °C -20 ~ 80
Relative humidity (non-condensing) % 5 ~ 85
Outline Information
Dimension   19” and 23”

*1: Saturated power is composed of optical signal and ASE power.
*2: Measured at G.652 SMF.
*3: Measured with PRBS 223 –1 at 10-10 BER.