iConverter Single-Fiber CWDM Multiplexers and Add/Drop

MUX/DEMUX and Optical
Add/Drop Mux Modules

iConverter Single-Fiber CWDM Multiplexers and Add/Drop
Single-Fiber CWDM/X Multiplexer/Demultiplexer Modules
Single-Fiber CWDM/AD Add & Drop Multiplexers
Two Networks on a Single-Fiber Protected Ring

 

PDF_014_36x36.jpgadatlap

Jellemzők

iConverter Single-Fiber CWDM/X

  • 2 and 4 channels (wavelengths) multiplexer/demultiplexer modules
  • Scalable to 8 Channels using Band Splitter

iConverter Single-Fiber CWDM/AD

  • 1-Channel Optical Add and Drop Multiplexers modules
  • Add and Drop functions in both directions

Common Product Features

  • Protocol and rate transparent for applications up to 10Gbps
  • Minimal and uniform optical loss facilitates easy network planning
  • Industry standard LC connectors
  • Seamless integration with other iConverter media converters and chassis for multi-service platforms
  • Passive device that can be installed in a powered chassis for managed applications
  • Manageable via SNMPv1/v2c/v3, Telnet or serial console port
  • One (1) Year Warranty and Free 24/7 Technical Support

 

iConverter Single-Fiber Course Wave Division Multiplexing (CWDM) modules provide a flexible and cost effective solution for increasing fiber capacity over single fiber networks. CWDM over single-fiber increases network bandwidth capacity by enabling multiple wavelengths, or data channels that carry independent services over existing fiber infrastructure. Up to sixteen separate wavelengths can be transported on a single-fiber link with iConverter Single-Fiber CWDM modules.

Alkalmazás

Two Networks on a Single-Fiber Protected Ring

Single-Fiber CWDM/X Multiplexer/Demultiplexer Modules

Single-Fiber iConverter CWDM/X modules are available in 2 and 4-Channel models, supporting a variety of wavelength combinations and port configurations.

The figure above shows a pair of 2-Channel, single-fiber CWDM/X units that operate using the 1550nm, 1570nm, 1590nm and 1610nm wavelengths. Note that each wavelength is unidirectional and only flows in one direction. The channel ports of iConverter CWDM/X model 8872 receive 1570nm and 1610nm, while the channel ports of model 8873 receive 1550nm and 1590nm.

 

Single-Fiber CWDM/AD Add & Drop Multiplexers

iConverter 1-Channel Single-Fiber CWDM/AD modules are Course Wave Division Multiplexing (CWDM) Optical Add and Drop Multiplexers (OADM). The CWDM/AD modules add (multiplex) and drop (de-multiplex) one channel on both directions of a CWDM single-fiber route. Nine standard models of the 1-Channel Single-Fiber CWDM/AD modules are available.

iConverter CWDM/AD modules add new access points anywhere on a single-fiber CWDM network, without impacting the remaining channels traversing the network. Access points can be added to linear, bus, and ring networks, where the dual-direction ring design provides redundant protected architecture.

 Single_CWDM_002_300x115.jpg

 The small and compact size of the iConverter CWDM/X and CWDM/AD modules yields one of the highest port densities in the industry. A 2U high 19-module iConverter chassis populated with modules can yield up to 120 wavelengths of capacity.

iConverter CWDM/X modules are passive devices that require no external power. They can also be installed in an iConverter powered chassis with a management module 1 and be managed using Omnitron’s NetOutlook® network management software, third-party SNMP software, Telnet or a serial console port.

 

The modules can be installed in any iConverter chassis equipped with other iConverter media converters and transponders to provide a multi-service platform capable of delivering Ethernet, TDM, SONET and other services across a CWDM fiber common link.

1 For complete management support, use a M2 series module (NMM2, GX/TM2, 2GXM2, 10/100M2, 2FXM2) or higher.

Paraméterek

Model Type Single-Fiber CWDM/X MUX/DEMUX
Channels 2 Channel
  4 Channel
Options Optional Expansion port
Common Link Single-Fiber
Connectors LC (UPC)
Dimensions W: 0.85” x D: 4.5” x H:2.8"
Weight 12 oz.
Compliances UL, CE, FCC Class A
Power Requirements Not powered for non-managed applications
0.025A max @ 3.3VDC for managed applications
Temperature Standard: 0 to 70o C
Storage: -40 to 80o C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4,000m
MTBF (hrs) > 1,000,000 hrs

Model Type Single-Fiber CWDM/AD Add/Drop MUX
Channels 1 Channel
Common Link Single-Fiber
Connectors LC (UPC)
Dimensions W: 0.85” x D: 4.5” x H:2.8"
Weight 12 oz.
Compliances UL, CE, FCC Class A
Power Requirements Not powered for non-managed applications
0.025A max @ 3.3VDC for managed applications
Temperature Standard: 0 to 70o C
Storage: -40 to 80o C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4,000m
MTBF (hrs) > 1,000,000 hrs
Model TypeModel NumberChannel Port
ITU Center Wavelength (nm)
Tx/Rx
Insertion LossAdjacent
Channel Port Isolation
Non-Adjacent
Channel Port Isolation
Return Loss (filtered channel)
2-Channel MUX/DEMUXs* 8870-0 1471/1491, 1511/1531 < 1.9dB > 30dB > 40dB > 45dB
8871-0 1491/1471, 1531/1511 <1.9dB > 30dB > 40dB > 45dB
8872-0 1551/1571, 1591/1611 <1.9dB > 30dB > 40dB > 45dB
8873-0 1571/1551, 1611/1591 <1.9dB > 30dB > 40dB > 45dB
4-Channel MUX/DEMUXs* 8874-0 1271/1291, 1311/1331, 1351/1371, 1431/1451 <2.4dB > 30dB > 40dB > 45dB
8875-0 1291/1271, 1331/1311, 1371/1351, 1451/1431 <2.4dB > 30dB > 40dB > 45dB
8876-0 1471/1491, 1511/1531, 1551/1571, 1591/1611 < 2.4dB > 30dB > 40dB > 45dB
8877-0 1491/1471, 1531/1511, 1571/1551, 1611/1591 < 2.4dB > 30dB > 40dB > 45dB
1-Channel
OADM
8878-XX See Table Below <1.9dB > 30dB > 40dB > 45dB

 
Consult factory for customized CWDM models
* Single-fiber CWDM/X models must be used in pairs. The Tx wavelengths on one end has to match the Rx wavelengths on the other.

Single_CWDM_012_670x162.jpg

Chassis and Mounting Options Ordering Table

 19-Module5-Module2-Module1-Module
ConfigurationAC
(60 watts)
AC
(120 watts)
24VDC48VDCAC24VDC48VDCAC18-60DCUS ACUNIV AC
One (1) Power Supply 8200-1 8201-1 8206-1 8205-1 8220-1 8226-1 8225-1 8230-0 8235-0 8240-1 8240-2
One (1) Power Supply with Dying Gasp Support - - - - - - - 8230-1 8235-1 8241-1 8241-2
Two (2) Power Supplies 8200-2 8201-2 8206-2 8205-2 8220-2 8226-2 8225-2 - - 8245-111* 8245-112*
Three (3) Power Supplies 8200-3 8201-3 8206-3 8205-3 - - - - - - -
Spare Power Supply 8200-9 8201-9 8206-9 8205-9 8220-9 8226-9 8225-9 - - - -
23" Rack Mounting Kit 8091-2 8091-2 8091-2 8091-2 8092-2 8092-2 8092-2 - - - -
Blank Module Panel 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 - -
Wall Mounting Hardware Kit -   - - - - - 8249-0 8249-0 8249-0 8249-0
1U 19" Rack Mount Shelf - - - - - - - 8260-0 8260-0 8260-0 8260-0
DIN Rail Mounting Kit -   - - - - - - - 8250-0 8250-0

 
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet