iConverter OC12FF
Data SheetJellemzők
- OC-12 multimode to single-mode fiber converter
- Supports multimode, single-mode, and single-fiber with SC connectors
- Supports distances up to 80km or longer*
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Lifetime Warranty and free 24/7 Technical Support
Alkalmazás
The iConverter OC12FF managed media converter provides multimode to single-mode and dual to single fiber conversion, and is a cost-effective solution for extending SONET/SDH network distances.
iConverter OC12FF models are available with multimode, single-mode, and single-fiber options. The single-mode fiber port supports SC connectors and distances up to 80km. The multimode fiber port supports SC connectors and distances up to 550m.
The iConverter OC12FF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.
The iConverter OC12FF is available as a compact, unmanaged standalone unit, or as a chassis plug-in module that can be managed with a management module installed in the chassis. The hot-swappable plug-in module can be mounted in a high-density 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.
The standalone OC12FF can be wall-mounted and is DC powered. It can be ordered with an external AC/DC power adapter, or it can be directly powered using a 2-pin terminal connector.
Specifications
| Model Type | iConverter OC12FF | |
| Protocols | OC-12, STM-4 | |
| Compliance | UL, FCC Class A, CE, NEBS Level 3 | |
| Fiber Connectors | SC, Single-Fiber SC | |
| Controls | LP, RFD | |
| LED Displays | Power, FO link (2) | |
| Dimensions | Plug-in: Standalone: |
W 0.85” x D 4.5” x H 2.8” W 3.8” x D 4.8” x H 1.0” |
| Weight | Plug-in: Standalone without Power Adapter: Standalone with Power Adapter: |
8 oz. 1.0 lb. 1.5 lb. |
| DC Power Connector | Plug-in: Standalone: |
Power supplied by backplane 2.5mm Barrel Connector or 2 Pin Terminal Connector |
| DC Power Requirement (typical) | Plug-in: Standalone: |
0.5A @ 3.3VDC 5 - 32VDC 0.3A @ 9VDC (1.0A max) |
| AC Power Adapter [US] | Plug-in: Standalone: |
N/A 100 - 120VAC/60Hz 0.05A @ 120VAC |
| AC Power Adapter [Universal] | Plug-in: Standalone: |
N/A 100 - 240VAC/50 to 60Hz 0.05A @ 120VAC |
| Temperature | Standard: Wide: Storage: |
Standard: 0 to 50º C Wide: -40 to 60º C Storage: -40 to 80º C |
| Humidity | 5 to 95% (non-condensing) | |
| Altitude | -100m to 4000m | |
| MTBF (hrs) | Plug-in: Standalone with US Power Adapter: Standalone with Universal Adapter: |
1,600,000 250,000 100,000 |
| Model Type | Fiber Type (Port 1 / Port 2) | Distance Port 1 | Distance Port 2 | Connector Type | Fiber Type Port1 Port2 | Tx λ (nm) | Rx λ (nm) | Min. Tx Power (dBm) | Max. Tx Power (dBm) | Min. Rx Sense (dBm) | Max. Rx Sense (dBm) | Link Budget (dBm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SC/SC | ||||||||||||
| OC12FF Dual Fiber | MM / SM | 550m | 12km | 8681-1 | MM | 1310 | 1310 | -20 | -14 | -26 | -14 | 6 |
| SM | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | |||||
| MM / SM | 550m | 34km | 8681-2 | MM | 1310 | 1310 | -20 | -14 | -26 | -14 | 6 | |
| SM | 1310 | 1310 | -5 | 0 | -23 | -3* | 18 | |||||
| MM / SM | 550m | 80km | 8681-3 | MM | 1310 | 1310 | -20 | -14 | -26 | -14 | 6 | |
| SM | 1550 | 1550 | -5 | 0 | -23 | -3* | 18 | |||||
| OC12FF Single-Fiber | MM / SM | 550m | 20km | 8690-1 | MM | 1310 | 1310 | -20 | -14 | -26 | -14 | 6 |
| SM | 1310 | 1550 | -9.5 | -3 | -20 | -3 | 10.5 | |||||
| MM / SM | 550m | 20km | 8691-1 | MM | 1310 | 1310 | -20 | -14 | -26 | -14 | 6 | |
| SM | 1550 | 1310 | -9.5 | -3 | -20 | -3 | 10.5 | |||||
| SM / SM | 12km | 20km | 8692-1 | SM | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | |
| SM | 1310 | 1550 | -9.5 | -3 | -20 | -3 | 10.5 | |||||
| SM / SM | 12km | 20km | 8693-1 | SM | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | |
| SM | 1550 | 1310 | -9.5 | -3 | -20 | -3 | 10.5 |
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.
Chassis and Mounting Options Ordering Table
| 19-Module | 5-Module | 2-Module | 1-Module | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Configuration | AC (60 watts) | AC (120 watts) | 24VDC | 48VDC | AC | 24VDC | 48VDC | AC | 18-60DC | US AC | UNIV AC |
| One (1) Power Supply | 8200-1 | 8201-1 | 8206-1 | 8205-1 | 8220-1 | 8226-1 | 8225-1 | 8230-0 | 8235-0 | 8240-1 | 8240-2 |
| One (1) Power Supply with Dying Gasp Support | - | - | - | - | - | - | - | 8230-1 | 8235-1 | 8241-1 | 8241-2 |
| Two (2) Power Supplies | 8200-2 | 8201-2 | 8206-2 | 8205-2 | 8220-2 | 8226-2 | 8225-2 | - | - | 8245-111* | 8245-112* |
| Three (3) Power Supplies | 8200-3 | 8201-3 | 8206-3 | 8205-3 | - | - | - | - | - | - | - |
| Spare Power Supply | 8200-9 | 8201-9 | 8206-9 | 8205-9 | 8220-9 | 8226-9 | 8225-9 | - | - | - | - |
| 23" Rack Mounting Kit | 8091-2 | 8091-2 | 8091-2 | 8091-2 | 8092-2 | 8092-2 | 8092-2 | - | - | - | - |
| Blank Module Panel | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | - | - |
| Wall Mounting Hardware Kit | - | - | - | - | - | - | 8249-0 | 8249-0 | 8249-0 | 8249-0 | |
| 1U 19" Rack Mount Shelf | - | - | - | - | - | - | - | 8260-0 | 8260-0 | 8260-0 | 8260-0 |
| DIN Rail Mounting Kit | - | - | - | - | - | - | - | - | 8250-0 | 8250-0 | |
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
