iConverter 10/100
Data SheetJellemzők
- The iConverter 10/100 is an IEEE 802.3 compatible 10BASE-T UTP or 100BASE-TX to Fast Ethernet fiber converter
- Supports multimode, single-mode, and single-fiber with ST, SC, LC and MT-RJ connectors
- UTP port with 10/100 automatically supports Half or Full-Duplex auto-negotiation with a manual crossover switch
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Wide Temperature models available with temperature range of -40 to +60º C
- Lifetime Warranty and free 24/7 Technical Support
Alkalmazás
The iConverter 10/100 managed media converters are members of the modular iConverter product family, and provide 10BASE-T or 100BASE-TX to 100BASE-FX fiber conversion.
The iConverter 10/100 modules are available with multimode, single-mode and single-fiber options, and support ST, SC,
MT-RJ and LC connectors. The UTP port supports 10/100 and Half/Full-Duplex auto-negotiation with both hardware and software manual override. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment. The 10/100 also features two Ethernet Backplane ports to provide connectivity to adjacent modules for network expansion and for in-band connectivity to an iConverter Network Management Module.
The 10/100 features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.
iConverter 10/100 modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
Specifications
| Model Type | 10/100 |
| Protocols | 100BASE-FX, 10BASE-T, or 100BASE-TX |
| UTP Connectors | RJ-45 |
| Fiber Connectors | SC, ST, LC, MT-RJ, Single-Fiber SC |
| Controls | UTP X-over, LS/LP, RFD, Auto/Man, 10/100, FDX/HDX |
| LED Displays | Power, FO link, UTP link, Auto, UTP FDX/HDX, F/O FDX/HDX, 10, 100 |
| Dimensions | W:0.85" x D:4.5" x H:2.8" |
| Weight | 8 oz. |
| Compliance | UL, CE, FCC Class A, NEBS Level 3 |
| Power Requirement | 0.95A @ 3.3VDC (typical) |
| Temperature | Standard: 0 to 50º C Wide: -40 to 60º C Storage: -40 to 80º C |
| Humidity | 5 to 95% (non-condensing) |
| Altitude | -100m to 4000m |
| MTBF (hrs) | 1,050,000 |
| Model Type | Fiber Type | Distances | Connector Type | Tx λ (nm) | Rx λ (nm) | Min. Tx Power (dBm) | Max. Tx Power (dBm) | Min. Rx Sense (dBm) | Max. Rx Sense (dBm) | Link Budget (dBm) | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ST | SC | MT-RJ | LC | ||||||||||
| 10/100 Dual Fiber | |||||||||||||
| MM | 5km | 8380-0 | 8382-0 | 8384-0 | 8386-0 | 1310 | 1310 | -24 | -14 | -31 | -14 | 7 | |
| SM | 30km | 8381-1 | 8383-1 | 8385-1 | 8387-1 | 1310 | 1310 | -15 | -8 | -31 | -8 | 16 | |
| SM | 60km | 8381-2 | 8383-2 | - | 8387-2 | 1310 | 1310 | -5 | 0 | -31 | -3* | 26 | |
| SM | 120km | - | 8383-3 | - | 8387-3 | 1550 | 1550 | -5 | 0 | -31 | -3* | 26 | |
| 10/100 Single-Fiber | SM | 20km | - | 8390-1 | - | - | 1310 | 1550 | -15 | -5 | -30 | -3 | 15 |
| SM | 40km | - | 8390-2 | - | - | 1310 | 1550 | -8 | 0 | -30 | -3* | 22 | |
| SM | 60km | - | 8390-3 | - | - | 1310 | 1550 | -5 | 0 | -31 | -3* | 26 | |
| SM | 20km | - | 8391-1 | - | - | 1550 | 1310 | -15 | -5 | -30 | -3 | 15 | |
| SM | 40km | - | 8391-2 | - | - | 1550 | 1310 | -8 | 0 | -30 | -3* | 22 | |
| SM | 60km | - | 8391-3 | - | - | 1550 | 1310 | -5 | 0 | -31 | -3* | 26 | |
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models and other fiber configurations.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.
Chassis and Mounting Options Ordering Table
| 19-Module | 5-Module | 2-Module | 1-Module | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Configuration | AC (60 watts) | AC (120 watts) | 24VDC | 48VDC | AC | 24VDC | 48VDC | AC | 18-60DC | US AC | UNIV AC |
| One (1) Power Supply | 8200-1 | 8201-1 | 8206-1 | 8205-1 | 8220-1 | 8226-1 | 8225-1 | 8230-0 | 8235-0 | 8240-1 | 8240-2 |
| One (1) Power Supply with Dying Gasp Support | - | - | - | - | - | - | - | 8230-1 | 8235-1 | 8241-1 | 8241-2 |
| Two (2) Power Supplies | 8200-2 | 8201-2 | 8206-2 | 8205-2 | 8220-2 | 8226-2 | 8225-2 | - | - | 8245-111* | 8245-112* |
| Three (3) Power Supplies | 8200-3 | 8201-3 | 8206-3 | 8205-3 | - | - | - | - | - | - | - |
| Spare Power Supply | 8200-9 | 8201-9 | 8206-9 | 8205-9 | 8220-9 | 8226-9 | 8225-9 | - | - | - | - |
| 23" Rack Mounting Kit | 8091-2 | 8091-2 | 8091-2 | 8091-2 | 8092-2 | 8092-2 | 8092-2 | - | - | - | - |
| Blank Module Panel | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | - | - |
| Wall Mounting Hardware Kit | - | - | - | - | - | - | 8249-0 | 8249-0 | 8249-0 | 8249-0 | |
| 1U 19" Rack Mount Shelf | - | - | - | - | - | - | - | 8260-0 | 8260-0 | 8260-0 | 8260-0 |
| DIN Rail Mounting Kit | - | - | - | - | - | - | - | - | 8250-0 | 8250-0 | |
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet
