iConverter Tx/2Fx and Tx/2Tx
Jellemzők
- The iConverter Redundant Fast Ethernet modules provide hot backup, 100 microseconds link redundancy for critical applications
- Tx/2Fx model provides 100BASE-TX UTP to two 100BASE-FX fiber links
- Tx/2Tx models provide 100BASE-TX UTP to two 100BASE-TX UTP copper links
- Fiber modules support multimode, single-mode, and single-fiber with ST, SC, LC and MT-RJ connectors
- Auto-negotiation or forced Half/Full-Duplex and crossover switches on all UTP ports
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- Lifetime Warranty and free 24/7 Technical Support
Alkalmazás
The iConverter Redundant Fast Ethernet managed media converters are members of the modular iConverter product family, and include:
- Tx/2Tx - 100BASE-TX UTP to dual 100BASE-TX UTP
- Tx/2Fx - 100BASE-TX UTP to dual 100BASE-FX dual fiber
- Tx/2Fx SF - 100BASE-TX UTP to dual 100BASE-FX single-fiber
The iConverter Redundant Fast Ethernet modules are designed for use in networks that require fiber or copper link redundancy. With a link fault detection time of 100 microseconds, the Redundant iConverter modules provide the rapid response time required for mission-critical applications.
All ports support Half or Full-Duplex operation, and the UTP ports can auto-negotiate or be manually set to a required duplex mode. The fiber ports are always set to manual mode. All ports in an application must be set to the same duplex mode.
All ports support Link Propagation (Link Loss Carry Forward), Link Segmentation, Remote Fault Detection and Symmetrical Fault Detection modes to facilitate quick fault detection, isolation and reporting.
iConverter Redundant Fast Ethernet modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
Specifications
Model Type | Tx/2Fx | Tx/2Tx |
Protocols | 100BASE-FX, 100BASE-TX | 100BASE-TX |
Primary Connectors | RJ-45 | RJ-45 |
Redundant Connectors | SC, ST, LC, MT-RJ, Single-Fiber SC |
RJ-45 |
Controls | UTP X-over, LS/LP, RFD, SFD, UTP Auto/Man, FDX/HDX | UTP X-over, LS/LP, RFD, SFD, UTP Auto/Man, FDX/HDX |
LED Displays | Power, FO link, UTP link, Select, Auto, FDX/HDX | Power, UTP link, UTP link, Select, Auto, FDX/HDX |
Dimensions | W:0.85" x D:4.5" x H:2.8" | |
Weight | 8 oz. | |
Compliance | UL, CE, FCC Class A | |
Power Requirement | 0.7A @ 3.3VDC | 1.1A @ 3.3VDC |
Temperature | Standard: 0 to 50º C Wide: -40 to 60º C Storage: -40 to 80º C |
|
Humidity | 5 to 95% (non-condensing) | |
Altitude | -100m to 4000m | |
MTBF (hrs) | 520,000 |
Model Type | Fiber Type | Distances | Connector Type | Tx λ (nm) | Rx λ (nm) | Min. Tx Power (dBm) | Max. Tx Power (dBm) | Min. Rx Sense (dBm) | Max. Rx Sense (dBm) | Link Budget (dBm) | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ST | SC | MT-RJ | LC | RJ-45 | ||||||||||
Tx/2Fx Dual Fiber |
MM | 5km | 8420-0 | 8422-0 | 8424-0 | - | - | 1310 | 1310 | -24 | -14 | -31 | -14 | 7 |
SM | 30km | 8421-1 | 8423-1 | 8425-1 | 8427-1 | - | 1310 | 1310 | -15 | -8 | -31 | -8 | 16 | |
SM | 60km | 8421-2 | 8423-2 | - | 8427-2 | - | 1310 | 1310 | -5 | 0 | -31 | -3* | 26 | |
SM | 120km | - | 8423-3 | - | 8427-3 | - | 1550 | 1550 | -5 | 0 | -31 | -3* | 26 | |
Tx/2Fx Single-Fiber | SM | 20km | - | 8430-1 | - | - | - | 1310 | 1550 | -15 | -5 | -30 | -3 | 15 |
SM | 40km | - | 8430-2 | - | - | - | 1310 | 1550 | -8 | 0 | -30 | -3* | 22 | |
SM | 60km | - | 8430-3 | - | - | - | 1310 | 1550 | -5 | 0 | -31 | -3 | 26 | |
SM | 20km | - | 8431-1 | - | - | - | 1550 | 1310 | -15 | -5 | -30 | -3 | 15 | |
SM | 40km | - | 8431-2 | - | - | - | 1550 | 1310 | -8 | 0 | -30 | -3* | 22 | |
SM | 60km | - | 8431-3 | - | - | - | 1550 | 1310 | -5 | 0 | -31 | -3 | 26 | |
Tx/2Tx | UTP | 100m | - | - | - | - | 8400-0 | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.
Chassis and Mounting Options Ordering Table
19-Module | 5-Module | 2-Module | 1-Module | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Configuration | AC (60 watts) | AC (120 watts) | 24VDC | 48VDC | AC | 24VDC | 48VDC | AC | 18-60DC | US AC | UNIV AC |
One (1) Power Supply | 8200-1 | 8201-1 | 8206-1 | 8205-1 | 8220-1 | 8226-1 | 8225-1 | 8230-0 | 8235-0 | 8240-1 | 8240-2 |
One (1) Power Supply with Dying Gasp Support | - | - | - | - | - | - | - | 8230-1 | 8235-1 | 8241-1 | 8241-2 |
Two (2) Power Supplies | 8200-2 | 8201-2 | 8206-2 | 8205-2 | 8220-2 | 8226-2 | 8225-2 | - | - | 8245-111* | 8245-112* |
Three (3) Power Supplies | 8200-3 | 8201-3 | 8206-3 | 8205-3 | - | - | - | - | - | - | - |
Spare Power Supply | 8200-9 | 8201-9 | 8206-9 | 8205-9 | 8220-9 | 8226-9 | 8225-9 | - | - | - | - |
23" Rack Mounting Kit | 8091-2 | 8091-2 | 8091-2 | 8091-2 | 8092-2 | 8092-2 | 8092-2 | - | - | - | - |
Blank Module Panel | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | - | - |
Wall Mounting Hardware Kit | - | - | - | - | - | - | 8249-0 | 8249-0 | 8249-0 | 8249-0 | |
1U 19" Rack Mount Shelf | - | - | - | - | - | - | - | 8260-0 | 8260-0 | 8260-0 | 8260-0 |
DIN Rail Mounting Kit | - | - | - | - | - | - | - | - | 8250-0 | 8250-0 |
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet