iConverter Gx*
*The iConverter Gx modules are not supported in future software releases and are not recommended for new designs or deployments. View the iConverter Gx AN web page.
Jellemzők
- The iConverter Gx is an IEEE 802.3ab compatible 1000BASE-T UTP to 1000BASE-X fiber converter
- Supports multimode, single-mode and single-fiber
- 1000Mbps UTP port with Half or Full-Duplex auto-negotiation
- UTP auto-crossover feature eliminates the need for a crossover cable
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Lifetime Warranty and free 24/7 Technical Support
Alkalmazás
The iConverter Gx managed media converters are members of the modular iConverter product family, and provide 1000BASE-T UTP to 1000BASE-X fiber conversion.
The iConverter Gx models are available in multimode, single-mode, and single-fiber options. The Gx supports ST, SC, MT-RJ, and LC connectors. The UTP port supports 1000BASE-T in either Half or Full-Duplex mode. The UTP auto-crossover feature eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations.
The iConverter Gx features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.
iConverter Gx modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. It can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
Specifications
Model Type | Gx |
Protocols | 1000BASE-SX/LX,1000BASE-T |
UTP Connectors | RJ-45 |
Fiber Connectors | SC, LC, MT-RJ, Single-Fiber SC |
Controls | LS/LP, RFD, UTP FDX/HDX |
LED Displays | Power, FO link, UTP link, FDX/HDX |
Dimensions | W:0.85" x D:4.5" x H:2.8" |
Weight | 8 oz. |
Compliance | UL, CE, FCC Class A, NEBS Level 3 |
Power Requirement | 1.4A @ 3.3VDC (typical) |
Temperature | Standard: 0 to 50º C Wide: -40 to 60º C Storage: -40 to 80º C |
Humidity | 5 to 95% (non-condensing) |
Altitude | -100m to 4000m |
MTBF (hrs) | 1,100,000 |
Model Type | Fiber Media Type | Distances | Connector Type | Tx λ (nm) | Rx λ (nm) | Min. Tx Power (dBm) | Max. Tx Power (dBm) | Min. Rx Sense (dBm) | Max. Rx Sense (dBm) | Link Budget (dBm) | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|
SC | MT-RJ | LC | ||||||||||
Gx Dual Fiber |
MM/DF | 220/550m1 | 8502-0 | 8504-0 | 8506-0 | 850 | 850 | -10 | -4 | -17 | -3 | 7 |
SM | 12km | 8503-1 | 8505-1 | 8507-1 | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | |
SM | 34km | 8503-2 | - | 8507-2 | 1310 | 1310 | -5 | 0 | -23 | -3* | 18 | |
SM | 80km | 8503-3 | - | 8507-3 | 1550 | 1550 | -5 | 0 | -23 | -3* | 18 | |
SM | 140km | 8503-5 | - | - | 1550 | 1550 | 2 | 5 | -28 | -8 | 30 | |
Gx Single- Fiber | SM | 20km | 8510-1 | - | - | 1310 | 1550 | -9.5 | -3 | -20 | -3 | 10.5 |
SM | 20km | 8511-1 | - | - | 1550 | 1310 | -9.5 | -3 | -20 | -3 | 10.5 | |
SM | 40km | 8510-2 | - | - | 1310 | 1550 | -3 | 0 | -20 | -3 | 17 | |
SM | 40km | 8511-2 | - | - | 1550 | 1310 | -3 | 0 | -20 | -3 | 17 |
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.
1 62.5/125μm, 100/140μm multimode fiber up to 220m. 50/125μm multimode fiber up to 550m. Refer to the fiber cable manufacturer for multimode distance specifications.
Chassis and Mounting Options Ordering Table
19-Module | 5-Module | 2-Module | 1-Module | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Configuration | AC (60 watts) | AC (120 watts) | 24VDC | 48VDC | AC | 24VDC | 48VDC | AC | 18-60DC | US AC | UNIV AC |
One (1) Power Supply | 8200-1 | 8201-1 | 8206-1 | 8205-1 | 8220-1 | 8226-1 | 8225-1 | 8230-0 | 8235-0 | 8240-1 | 8240-2 |
One (1) Power Supply with Dying Gasp Support | - | - | - | - | - | - | - | 8230-1 | 8235-1 | 8241-1 | 8241-2 |
Two (2) Power Supplies | 8200-2 | 8201-2 | 8206-2 | 8205-2 | 8220-2 | 8226-2 | 8225-2 | - | - | 8245-111* | 8245-112* |
Three (3) Power Supplies | 8200-3 | 8201-3 | 8206-3 | 8205-3 | - | - | - | - | - | - | - |
Spare Power Supply | 8200-9 | 8201-9 | 8206-9 | 8205-9 | 8220-9 | 8226-9 | 8225-9 | - | - | - | - |
23" Rack Mounting Kit | 8091-2 | 8091-2 | 8091-2 | 8091-2 | 8092-2 | 8092-2 | 8092-2 | - | - | - | - |
Blank Module Panel | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | - | - |
Wall Mounting Hardware Kit | - | - | - | - | - | - | 8249-0 | 8249-0 | 8249-0 | 8249-0 | |
1U 19" Rack Mount Shelf | - | - | - | - | - | - | - | 8260-0 | 8260-0 | 8260-0 | 8260-0 |
DIN Rail Mounting Kit | - | - | - | - | - | - | - | - | 8250-0 | 8250-0 |
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet