iConverter 10T/2
Jellemzők
- The iConverter 10T/2 is an IEEE 802.3 compatible 10BASE-T unshielded twisted pair (UTP) to 10BASE-2 coax converter
- Seamlessly connects 10BASE-T hubs via coax and coax network segments to 10BASE-T hubs
- SNMP management via NetOutlook ® provides real-time port and module information, remote parameter configuration and trap notification
- Management is available with the addition of a management module to the chassis
- Supports 50 ohm coax to a maximum distance of 185m and 30 stations
- Features a UTP crossover switch and automatic polarity detection and correction
- Features switch-selectable coax line termination for convenience, space and cost saving
- LED displays for immediate visual status of each port
- Lifetime Warranty and free 24/7 Technical Support
Alkalmazás
The iConverter 10T/2 is a 10BASE-T to 10BASE-2 media converter that converts between twisted pair (UTP) and coax LANs and joins their collision domains. The iConverter 10T/2 facilitates the connection of a coax segment to a 10BASE-T hub. When using a pair of iConverter 10T/2 converters back to back, they can connect between two 10BASE-T hubs via coax.
The UTP port has a modular EIA/TIA 568 RJ-45 connector that supports categories 3 to 5 wiring and connects to distances up to 100m. The iConverter 10T/2 detects and corrects wiring polarity reversals, and features a crossover switch that facilitates a straight-through cable connection to a workstation or a hub, eliminating the need for a crossover cable.
The coax port has a BNC connector and supports a 50 ohm cable and distances of up to 185m. Per IEEE 802.3 standard, up to 30 workstations can be attached to the coax segment. The iConverter 10T/2 features a convenient and cost-effective cable termination via a termination switch and a built-in termination element.
The iConverter 10T/2 module is hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. It can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
Specifications
Model Type | 10T/2 |
Protocols | 10BASE-T and 10BASE-2 |
Connectors | RJ-45 and BNC |
UTP Cable | Categories 3, 4, 5 (EIA/TIA 568) |
BNC Cable | 50 ohm, RG-58/U, RG-58C/U, RG-58/U or equivalent |
Controls | Coax Termination, Backplane Enables |
LED Displays | Power, Coax Collision, Coax Activity, UTP Link/Activity |
Dimensions | W:0.85" x D:4.5" x H:2.8" |
Weight | 8 oz. |
Compliance | UL, CE, FCC Class A |
Power Requirement | 1.0A @ 3.3VDC (typical) |
Temperature | Standard: 0 to 50º C Wide: -40 to 60º C Storage: -40 to 80º C |
Humidity | 5 to 95% (non-condensing) |
Altitude | -100m to 4000m |
MTBF (hrs) | 722,000 |
Model Type | Connectors | Distance |
---|---|---|
8340-0 | UTP | 100m |
Coax | 185m |
For wide temperature (-40 to 60º C) modules, add a "W" to the end of the model number. Consult factory for other configurations and extended temperature (-40 to +75º C) modules.
Chassis and Mounting Options Ordering Table
19-Module | 5-Module | 2-Module | 1-Module | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Configuration | AC (60 watts) | AC (120 watts) | 24VDC | 48VDC | AC | 24VDC | 48VDC | AC | 18-60DC | US AC | UNIV AC |
One (1) Power Supply | 8200-1 | 8201-1 | 8206-1 | 8205-1 | 8220-1 | 8226-1 | 8225-1 | 8230-0 | 8235-0 | 8240-1 | 8240-2 |
One (1) Power Supply with Dying Gasp Support | - | - | - | - | - | - | - | 8230-1 | 8235-1 | 8241-1 | 8241-2 |
Two (2) Power Supplies | 8200-2 | 8201-2 | 8206-2 | 8205-2 | 8220-2 | 8226-2 | 8225-2 | - | - | 8245-111* | 8245-112* |
Three (3) Power Supplies | 8200-3 | 8201-3 | 8206-3 | 8205-3 | - | - | - | - | - | - | - |
Spare Power Supply | 8200-9 | 8201-9 | 8206-9 | 8205-9 | 8220-9 | 8226-9 | 8225-9 | - | - | - | - |
23" Rack Mounting Kit | 8091-2 | 8091-2 | 8091-2 | 8091-2 | 8092-2 | 8092-2 | 8092-2 | - | - | - | - |
Blank Module Panel | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | - | - |
Wall Mounting Hardware Kit | - | - | - | - | - | - | 8249-0 | 8249-0 | 8249-0 | 8249-0 | |
1U 19" Rack Mount Shelf | - | - | - | - | - | - | - | 8260-0 | 8260-0 | 8260-0 | 8260-0 |
DIN Rail Mounting Kit | - | - | - | - | - | - | - | - | 8250-0 | 8250-0 |
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet