JETTING MJET V3
Features
- Pneumatic operation. An external compressor provides the right amount of compressed air for the drive motor and the injection.
- Infinitely adjustable mechanical feed, compressed air to float the cable, reduce friction.
- Cable-saving operation, with large contact area feed belts that move the cable gently.
- Electronic cable protection: if the cable is detected to be jammed or slipping, the drive will stop within 250 ms, so the cable is not pinched.
- OLED display for blowing speed, cable length, current operating status, insertion force.
Applications
- Efficient, fast cable blowing, stable operation.
- Outdoor design, robust construction.
Technical specification
- Article number: K-JE-V3
- Blowing speed: max. 120 m/min.
- Thrust (adjustable without gear): max. 1200 N.
- Max air pressure: 20 bar.
- Cable diameter: 4 - 40 mm.
- Protection tube diameter: 10 - 63 mm.
- Weight: 22 kg.
- Dimensions: 700x300x310 mm (width x height x depth)
The compressed air is prevented from flowing backwards by a sealing ring. Seal rings of different sizes for different cable diameters are available on a separate data sheet.
The split inlet and outlet elements for different pipe and cable diameters are given in a separate data sheet.
Accessories
Recommended accessories:
- Cleaning plugs for cleaning protective tubes with different diameters (separate data sheet).
- Brass threaded cable heads for different cable sizes (see separate datasheet).
- K-JE-JE-YBL: for blowing in a second or third cable, Y block (separate data sheet).
- K-JE-V1-EPFU kit: for cables with diameters below 3 mm (see separate data sheet).
- K-JE-2023: cable drum holder stand.
- K-JE-DB-STD: feed belt set (upper and lower belt).
- K-JE-149: Lubricant for microcable spraying: 240 ml.
- K-JE-148: Lubricant for cable spraying, 0,95 l.
- K-JE-114 Jetting 4LE air compressor with aftercooler, 275 l/min capacity. Pressure: max. 10 bar.
- K-JE-118: Air hose 3/8" Cejn-Cejn, length 10 m, max. pressure 15 bar.