iConverter 4xT1/E1 MUX/M
Managed T1/E1 Multiplexer
Jellemzők
- Multiplexes four independent T1 or E1 channels from copper links into one fiber link
- 10/100/1000 copper Ethernet multiplexed with T1/E1 circuits
- Small Form Pluggable (SFP) or fixed-fiber transceivers, in standard and CWDM wavelengths
- Supports multimode, single-mode dual fiber, single-mode single-fiber
- Remotely-managed configuration and testing enables rapid deployments
- Management via local serial port, Telnet or SNMP
- Configurable alarm relay contacts for audio/visual fault notification
- Supports local and remote fiber and copper loop-back modes
- Commercial (0 to 50º C) and wide (-40 to 60º C) operating temperature ranges
- Lifetime Warranty and free 24/7 Technical Support
Alkalmazás
Data SheetThe iConverter 4xT1/E1 MUX/M multiplexes up to four T1/E1s and Ethernet onto a fiber optic transport link, and features remotely managed testing and configuration capabilities.
The iConverter 4xT1/E1 MUX/M operates in a back-to-back configuration, with one multiplexer at each end of the fiber transport link. The 4xT1/E1 MUX/M can be used in applications where services from legacy TDM equipment require transport across long distances that exceed the reach or capacity of copper. This includes applications such as T1/E1 extension, mobile backhaul and building-to-building PBX connectivity, making it ideal for Enterprise, Telecom and Utility industries.
The 4xT1/E1 MUX/M supports fixed-fiber and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. The 4xT1/E1 MUX/M supports multimode, single-mode, single-mode single-fiber, in standard and CWDM wavelengths.
The copper interfaces feature four RJ-48 connectors for balanced T1/E1 applications. An optional adapter cable is available to convert each RJ-48 interface to a BNC interface for unbalanced E1 transport applications.
The 4xT1/E1 MUX/M supports AMI, B8ZS and HDB3 line codes. DIP-switches provide easy configuration of the T1/E1 line codes and line build-out.
The 4xT1/E1 MUX/M features user-selectable local loop-back on both the copper and fiber ports, remote fiber loop-back and circuit test modes. These functions facilitate diagnosis of the remote unit, and minimizes the need for test equipment and support personnel at each end of a link. Alarm relay and LEDs provide fault notification for loss of power, LOS and AIS.
Configuration of T1/E1 line codes, line build out, loopbacks and circuit test is accomplished via local serial port, Telnet, SNMP or DIP-switches.
The 4xT1/E1 MUX/M is a compact, managed standalone unit available in both AC and DC models. The AC model accepts AC power input ranging from 100VAC to 240VAC, 50/60Hz, while the DC model accepts 18VDC to 60VDC.
Specifications
| Model Type | ManagediConverter 4xT1/E1 MUX |
| Protocols (TDM) | ANSI: T1.403, T1.102, AT&T: T62411, ITU: G.703, G.704, G.706, G.736, G.775, G.823, G.824, G.8261 ETSI: ETS 300 166 |
| Protocols (Ethernet) | 10BASE-T, 100BASE-TX, 1000BASE-T 1000BASE-X with 10,236 bytes max. frame size |
| Ethernet Throughput | 900Mbps |
| Copper Connectors Ethernet: T1/E1: |
RJ-45 RJ-48 |
| Fiber Connectors SFP: Dual Fiber: Single-Fiber: |
LC SC, ST SC |
| Controls | UTP Crossover, CableType / Distance, Loop, Fiber AIS, UTP AIS, Fiber Optic Test |
| LED Displays | Power, Test, RJ-45/RJ-48 Link, Fiber Optic Link |
| AC Power Input power requirements: Connector: |
100 to 240VAC 50/60Hz 0.5A @ 120VAC IEC320 |
| DC Power Input power requirements: Connector: |
18 to 60VDC 2.0A @ - 48VDC 3-pin terminal |
| Dimensions | W: 6.7” x D: 5.51” x H: 1.87” |
| Weight | 2.5 lbs |
| *Compliance | UL, CE, FCC Class A, NEBS 3 Compliant |
| Temperature | |
| Standard Operating: | 0 to 50º C |
| Wide Operating: | -40 to 60º C |
| Storage: | -40 to 80º C |
| Humidity | 5 to 95% (non-condensing) |
| Altitude | -100m to 4000m |
| MTBF (hrs) | |
| AC Model | 137,000 |
| DC Model | 148,000 |
| Type | Distance | Connector Type | Tx λ [nm] | Rx λ [nm] | Min. Tx Power [dBm] | Max. Tx Power [dBm] | Min. Rx Power [dBm] | Max. Rx Power [dBm] | Min Attenuation (dB) | Link Budget [dB] | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ST | SC | SFP | ||||||||||
| SFP | - | - | - | 8839N-0** | - | - | - | - | - | - | - | - |
| MM/DF | 220/550m | 8820N-0 | 8822N-0 | - | 850 | 850 | -10 | -4 | -17 | -3 | - | 7 |
| SM/DF | 12km | 8821N-1 | 8823N-1 | - | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | - | 10 |
| SM/DF | 34km | - | 8823N-2 | - | 1310 | 1310 | -5 | 0 | -23 | -3 | 3 | 18 |
| SM/DF | 80km | - | 8823N-3 | - | 1550 | 1550 | -5 | 0 | -23 | -3 | 3 | 18 |
| SM/DF | 110km | - | 8823N-4 | - | 1550 | 1550 | 0 | 5 | -24 | -3 | 8 | 24 |
| SM/DF | 140km | - | 8823N-5 | - | 1550 | 1550 | 2 | 5 | -28 | -8 | 13 | 30 |
| SM/SF | 20km | - | 8830N-1* | - | 1310 | 1550 | -9.5 | -3 | -20 | -3 | - | 10.5 |
| SM/SF | 20km | - | 8831N-1* | - | 1550 | 1310 | -9.5 | -3 | -20 | -3 | - | 10.5 |
| SM/SF | 40km | - | 8830N-2* | - | 1310 | 1550 | -3 | 0 | -20 | -3 | 3 | 17 |
| SM/SF | 40km | - | 8831N-2* | - | 1550 | 1310 | -3 | 0 | -20 | -3 | 3 | 17 |
* When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
** Use 1250 Mbps (GigE, FC) SFP
Consult the factory for other configurations
| Adapter Cable | |
|---|---|
| 9140-3 | RJ-48 to BNC 3 ft. cable |
| 9142-1 | RJ-48 Alarm Breakout Cable |
