iConverter CWDM/AD
1 and 2 Channel Optical
Add/Drop Multiplexer
Jellemzők
- 1 and 2 Channel Optical Add and Drop Multiplexers
- Add and Drop functions in both directions
- Protocol and rate transparent for applications up to 10Gbps
- Minimal and uniform optical loss facilitates easy network planning
- Scalable for new deployments and network upgrades
- Industry standard LC connectors
- Seamless integration with other iConverter media converters and chassis for multi-service platforms
- Passive device that can also be installed in a powered chassis for managed applications
- Management available with the addition of a management module to the chassis
- One (1) Year Warranty and Free 24/7 Technical Support
Alkalmazás
Data SheetiConverter CWDM/AD modules are Course Wave Division Multiplexing (CWDM) Optical Add/Drop Multiplexers (OADM). The CWDM/AD modules add (multiplex) and drop (demultiplex) selected channels, or wavelengths, on both directions of a CWDM common fiber link. Using iConverter CWDM/AD modules, network designers can add new access points anywhere on a CWDM network, without impacting the remaining channels traversing the network. Access points can be added to linear, bus, and ring networks, where the dual-direction ring design provides redundant protected architecture.
The iConverter 1-Channel CWDM/AD modules multiplex and demultiplex one specific CWDM channel from the common CWDM fiber link. Ten models of the 1-Channel CWDM A/D are available to support the ten CWDM wavelengths from 1270nm to 1450nm, and eight models are available to support the eight CWDM wavelengths from 1470nm to 1610nm.
The iConverter 2-Channel CWDM/AD modules offer the same functions as 1-Channel CWDM/AD modules but for two specific CWDM channels. Models are available to support any two wavelengths from 1270nm to 1450nm, or any two wavelengths from 1470nm to 1610nm.
The 1 and 2-channel models can be used to transport channels in one direction or in both directions of the CWDM common fiber link.
When adding CWDM channels to legacy 1310nm and 1550nm networks such as SONET/SDH, the iConverter Lower Band OADM and Upper Band OADM modules can be used. The Lower Band OADM adds/drops the 1270nm to 1450nm band, allowing either legacy 1310nm services or lower band CWDM wavelengths to be added and dropped from the common fiber. The Upper Band OADM adds/drops the 1470nm to 1610nm band, for legacy 1550nm services or upper band CWDM wavelengths.
Multiple iConverter CWDM/AD devices can be inserted within a CWDM network. The low energy loss associated with each device minimizes the impact to existing wavelengths in the CWDM network.
iConverter CWDM/AD modules are passive devices that require no external power. They can also be installed in an iConverter powered chassis with a management module¹ and be managed using Omnitron’s NetOutlook® network management software, third-party SNMP software, Telnet or a serial console port.
iConverter CWDM/AD modules can be installed in any iConverter chassis equipped with other iConverter media converters and transponders to provide a multi-service platform capable of delivering Ethernet, TDM, SONET and other services across a CWDM common fiber link.
1 For complete management functionality, use M2 series (NMM2, GX/TM2, 2GXM2, 10/100M2, 2FXM2) or higher series.
Specifications
| Model Type | CWDM/AD OADM |
| Channels | 1 or 2 Channels |
| Common Link | Fiber Pair |
| Connectors | LC (UPC) |
| Dimensions | W: 0.85” x D: 4.5” x H:2.8 |
| Weight | 12 oz. |
| Compliances | UL, CE, FCC Class A |
| Power Requirements | Not powered for non-managed applications 0.025A max @ 3.3VDC for managed applications |
| Temperature | Standard: 0 to 70o C |
| Storage: -40 to 80o C | |
| Humidity | 5 to 95% (non-condensing) |
| Altitude | -100m to 4,000m |
| MTBF (hrs) | > 1,000,000 hrs |
| Model Type | Insertion Loss | Adjacent Channel Port Isolation | Non-Adjacent Channel Port Isolation | Return Loss (filtered channel) |
|---|---|---|---|---|
| 8867-1, -2 | < 2.2dB | > 30dB | > 40dB | > 45dB |
| 8867-xx | < 1.7dB | > 30dB | > 40dB | > 45dB |
| 8868-xx | < 1.9dB | > 30dB | > 40dB | > 45dB |
| 8869-xx | < 1.9dB | > 30dB | > 40dB | > 45dB |
Lower and Upper Band OADM
| 8867-1 | Lower Band OADM (1271-1451nm) Add/drop the 1271 - 1451nm band, common port 1271 - 1611nm |
| 8867-2 | Upper Band OADM (1471-1611nm) Add/drop the 1471 - 1611nm band, common port 1271 - 1611nm |
ITU Center wavelengths in nm
1-Channel CWDM/AD Lower Band 8867 - xx
| xx | Channel Port |
| 27 | 1271 |
| 29 | 1291 |
| 31 | 1311 |
| 35 | 1351 |
| 37 | 1371 |
| 39 | 1391 |
| 41 | 1411 |
| 43 | 1431 |
| 45 | 1451 |
| Common port = 1271 - 1451nm | |
1-Channel CWDM/AD Upper Band 8867 - xx
| xx | Channel Port |
| 47 | 1471 |
| 49 | 1491 |
| 51 | 1511 |
| 53 | 1531 |
| 55 | 1551 |
| 57 | 1571 |
| 59 | 1591 |
| 61 | 1611 |
| Common port = 1471 - 1611nm | |
2-Channel CWDM/AD Lower Band 8868 - xx
| Channel Port 1 | Channel Port 2 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| - | 1271 | 1291 | 1311 | 1331 | 1351 | 1371 | 1391 | 1411 | 1431 | 1451 |
| 1271 | - | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 |
| 1291 | - | - | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 |
| 1311 | - | - | - | 23 | 24 | 25 | 26 | 27 | 28 | 29 |
| 1331 | - | - | - | - | 34 | 35 | 36 | 37 | 38 | 39 |
| 1351 | - | - | - | - | - | 45 | 46 | 47 | 48 | 49 |
| 1371 | - | - | - | - | - | - | 56 | 57 | 58 | 59 |
| 1391 | - | - | - | - | - | - | - | 67 | 68 | 69 |
| 1411 | - | - | - | - | - | - | - | - | 78 | 79 |
| 1431 | - | - | - | - | - | - | - | - | - | 89 |
| Common port = 1271 - 1451nm | ||||||||||
2-Channel CWDM/AD Upper Band 8869 - xx
| Channel Port 1 | Channel Port 2 | |||||||
|---|---|---|---|---|---|---|---|---|
| - | 1471 | 1491 | 1511 | 1531 | 1551 | 1571 | 1591 | 1611 |
| 1471 | - | 01 | 02 | 03 | 04 | 05 | 06 | 07 |
| 1491 | - | - | 12 | 13 | 14 | 15 | 16 | 17 |
| 1511 | - | - | - | 23 | 24 | 25 | 26 | 27 |
| 1531 | - | - | - | - | 34 | 35 | 36 | 37 |
| 1551 | - | - | - | - | - | 45 | 46 | 47 |
| 1571 | - | - | - | - | - | - | 56 | 57 |
| 1591 | - | - | - | - | - | - | - | 67 |
| Common port = 1471 - 1611nm | ||||||||
Example: For wavelengths 1511 and 1531, model # is: 8869-23
NOTE: When using with 1310nm legacy SDH/SONET, CWDM wavelengths 1271, 1291, 1311, 1331 and 1351nm should not be used.
NOTE: When using with 1550nm legacy SDN/SONET, CWDM wavelengths 1511, 1531, 1551, 1571 and 1591nm should not be used.
Chassis and Mounting Options Ordering Table
| 19-Module | 5-Module | 2-Module | 1-Module | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Configuration | AC (60 watts) | AC (120 watts) | 24VDC | 48VDC | AC | 24VDC | 48VDC | AC | 18-60DC | US AC | UNIV AC |
| One (1) Power Supply | 8200-1 | 8201-1 | 8206-1 | 8205-1 | 8220-1 | 8226-1 | 8225-1 | 8230-0 | 8235-0 | 8240-1 | 8240-2 |
| One (1) Power Supply with Dying Gasp Support | - | - | - | - | - | - | - | 8230-1 | 8235-1 | 8241-1 | 8241-2 |
| Two (2) Power Supplies | 8200-2 | 8201-2 | 8206-2 | 8205-2 | 8220-2 | 8226-2 | 8225-2 | - | - | 8245-111* | 8245-112* |
| Three (3) Power Supplies | 8200-3 | 8201-3 | 8206-3 | 8205-3 | - | - | - | - | - | - | - |
| Spare Power Supply | 8200-9 | 8201-9 | 8206-9 | 8205-9 | 8220-9 | 8226-9 | 8225-9 | - | - | - | - |
| 23" Rack Mounting Kit | 8091-2 | 8091-2 | 8091-2 | 8091-2 | 8092-2 | 8092-2 | 8092-2 | - | - | - | - |
| Blank Module Panel | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | - | - |
| Wall Mounting Hardware Kit | - | - | - | - | - | - | 8249-0 | 8249-0 | 8249-0 | 8249-0 | |
| 1U 19" Rack Mount Shelf | - | - | - | - | - | - | - | 8260-0 | 8260-0 | 8260-0 | 8260-0 |
| DIN Rail Mounting Kit | - | - | - | - | - | - | - | - | 8250-0 | 8250-0 | |
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet
