OmniConverter FPoE/SL, FPoE/S and FPoE+/S
Jellemzők
- Power over Ethernet injector/source
- 10/100 UTP to fiber media converter
- Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ standards on one or two UTP copper ports
- Multiple port configurations:
- 2 Port Device: 1 Fiber + 1 UTP
- 3 Port Device: 2 Fiber + 1 UTP
- 3 Port Device: 1 Fiber + 2 UTP
- 4 Port Device: 2 Fiber + 2 UTP
- Supports 100BASE-FX fixed-fiber and 100BASE-FX SFP transceivers
- Redundant protected fiber link option (using dual SFP transceivers)
- Compatible with legacy pre-IEEE standard powered devices
- Configurable PoE power reset
- Available in AC and DC models
- Commercial (0 to 50ºC), wide (-40 to 60ºC) and extended1 (-40 to 75ºC) operating temperature ranges
- Lifetime Warranty and free 24/7 Technical Support
Alkalmazás
Ceiling Application
In this application example, IP security cameras and wireless access points (APs) are installed throughout a facility. The cameras and APs are mounted in ceilings and other hard to reach locations, where AC power is not readily available.
Fiber-to-the-Desktop
In this application example, a fiber-to-the-desktop network is deployed to leverage the security and distance benefits that come with fiber.
The OmniConverter FPoE/SL, FPoE/S and FPoE+/S are multi-port media converters that convert 10/100BASE-T UTP to 100BASE-FX fiber and support Power-over-Ethernet (PoE and PoE+). Classified as Power Sourcing Equipment (PSE), they can provide power to one or two Powered Devices (PDs) using standard UTP cables that carry the Ethernet data. The OmniConverter functions as a PoE mini-switch, and supports a variety of port configurations, including single or dual UTP and SFP ports.
The OmniConverter media converters can power PDs such as VoIP phones, wireless access points, network cameras, building access and automation equipment. They are especially useful at powering PDs in hard-to-reach locations with limited access to AC power outlets (ceilings, closets, etc.). The cost of bringing electrical power to each device is eliminated by powering the equipment through the UTP cable.
OmniConverter media converters are available in two power levels. FPoE/SL and FPoE/S models support PoE (IEEE 802.3af) and provide up to 15.4W of power per UTP port. FPoE+/S models support PoE+ (IEEE 802.3at) and provide up to 25.5W per port for more demanding PDs such as video conferencing equipment, PTZ (pan-tilt-zoom) cameras and 802.11n wireless access points.
Models with two fiber ports support redundant fiber uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used for daisy-chaining multiple media converters, or it may be used as another switch port.
Configurable features include link modes which can propagate link faults from fiber to copper and copper to fiber, and a PoE power reset function, in which a loss of fiber Rx link can disable the PSE power output for 2 seconds to allow the remote PD to re-initialize.
OmniConverter media converters support fixed-fiber connectors and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. The products support multimode, single-mode, single-mode single-fiber, in standard and CWDM wavelengths.
The compact standalone OmniConverter media converters can be tabletop mounted, wall mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. They can also be mounted on a 1U 19” rack-mount shelf. The products are DC powered and available with an optional external 100 - 240VAC universal power adapter.
Paraméterek
Model | FPoE/SL | FPoE/S | FPoE+/S |
Model Type | Standard PoE Fast Ethernet media converter |
High Power PoE+ Fast Ethernet media converter |
|
Standard (PoE) | IEEE 802.3af | IEEE 802.3at | |
Max PoE Power (per UTP port) | 15.4W | 25.5W | |
Reverse Polarity Support - Legacy PoE | Use 9143-6 Crossover Cable | Automatic | |
Protocols (Ethernet) | Fiber: 100BASE-FX UTP Copper: 10/100BASE-T |
||
Frame size | Up to 2,000 byte frames | Up to 10,240 byte frames | |
Copper Connectors | Ethernet: RJ-45 | ||
Fiber Connectors | SFP Model: Any MSA standard SFP Dual Fiber Model: SC, ST Single Fiber Model: SC |
||
AC Power requirements 1xUTP models [typical] |
100 to 240VAC / 47 to 63Hz 170 mA@120VAC |
100 to 240VAC / 50 to 60Hz 180 mA@120VAC |
100 to 240VAC / 50 to 60Hz 230 mA@120VAC |
AC Power requirements 2xUTP models [typical] |
100 to 240VAC / 50 to 60Hz 320 mA@120VAC |
100 to 240VAC / 50 to 60Hz 350mA@120VAC |
100 to 240VAC / 50 to 60Hz 460mA@120VAC |
DC Power requirements 1xUTP products [typical] |
46-57VDC 390 mA |
46-57VDC 420 mA |
52-57VDC 540 mA |
DC Power requirements 2xUTP products [typical] |
46-57VDC 725 mA |
46-57VDC 800mA |
52-57VDC 1.2A |
Dimensions | W: 4.5” x D: 6.0” x H 1.0” | ||
Weight - without power supply: - with power supply: |
1.1 lbs. 1.6 lbs. |
1.1 lbs. 2.3 lbs. |
|
Grounding (-9 model with terminal block) | Non-isolated (2 pos. terminal block) | Isolated (3 pos. terminal block) | |
Compliance | UL, CE, FCC Class A | ||
Temperature | Standard Operating: 0 to 50º C Wide Operating: -40 to 60º C Extended Operating: -40 to 75º C Storage: -40 to 80º C |
||
Humidity | 5 to 95% (non-condensing) | ||
Altitude | -100m to 4000m | ||
MTBF (Hours) - AC Model: - DC Model: |
177,000 hrs. 430,000 hrs. |
183,000 hrs. 474,000 hrs. |
83,000 hrs. 474,000 hrs. |
Type | Distance | Fiber Connector Type (qty) | Tx λ (nm) | Rx λ (nm) | Min. Tx Power (dBm) | Max. Tx Power (dBm) | Min. Rx Power (dBm) | Max. Rx Power (dBm) | Min Attenu- ation (dB) | Link Budget (dB) | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|
ST (1) | SC (1) | SFP (1 or 2) | ||||||||||
FPoE/SL Media Converter (IEEE 802.3af) | ||||||||||||
MM | 5km | 9340-0 | 9342-0 | - | 1310 | 1310 | -24 | -14 | -31 | -14 | - | 7 |
SM | 30km | 9341-1 | 9343-1 | - | 1310 | 1310 | -15 | -8 | -31 | -8 | - | 16 |
SM | 60km | 9341-2 | 9343-2 | - | 1310 | 1310 | -5 | 0 | -31 | -3 | 3 | 26 |
SM | 120km | - | 9343-3 | - | 1550 | 1550 | -5 | 0 | -31 | -3 | 3 | 26 |
SM-SF | 20km | - | 9350-1* | - | 1310 | 1550 | -15 | -5 | -30 | -3 | - | 15 |
SM-SF | 20km | - | 9351-1* | - | 1550 | 1310 | -15 | -5 | -30 | -3 | - | 15 |
SM-SF | 40km | - | 9350-2* | - | 1310 | 1550 | -8 | 0 | -30 | -3 | 3 | 22 |
SM-SF | 40km | - | 9351-2* | - | 1550 | 1310 | -8 | 0 | -30 | -3 | 3 | 22 |
100BASE-FX SFP (1) | - | - | - | 9359-0 | - | - | - | - | - | - | - | - |
100BASE-FX SFP (2) | - | - | - | 9359-1 | - | - | - | - | - | - | - | - |
* When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
1Consult factory for availability of extended temperature models and other fiber options.
Order the appropriate SFPs separately. Visit the Omnitron Optical Transceivers web page.
For more information on the 19” rack-mount shelf see: 19” Rack Mount web page
Type | Distance | Fiber Connector Type (qty) | Tx λ (nm) | Rx λ (nm) | Min. Tx Power (dBm) | Max. Tx Power (dBm) | Min. Rx Power (dBm) | Max. Rx Power (dBm) | Min Attenu- ation (dB) | Link Budget (dB) | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|
ST (1) | SC (1) | SFP (1 or 2) | ||||||||||
FPoE/S Media Converter IEEE (802.3af) | ||||||||||||
MM | 5km | 9300-0 | 9302-0 | - | 1310 | 1310 | -24 | -14 | -31 | -14 | - | 7 |
SM | 30km | 9301-1 | 9303-1 | - | 1310 | 1310 | -15 | -8 | -31 | -8 | - | 16 |
SM | 60km | 9301-2 | 9303-2 | - | 1310 | 1310 | -5 | 0 | -31 | -3 | 3 | 26 |
SM | 120km | - | 9303-3 | - | 1550 | 1550 | -5 | 0 | -31 | -3 | 3 | 26 |
SM-SF | 20km | - | 9310-1* | - | 1310 | 1550 | -15 | -5 | -30 | -3 | - | 15 |
SM-SF | 20km | - | 9311-1* | - | 1550 | 1310 | -15 | -5 | -30 | -3 | - | 15 |
SM-SF | 40km | - | 9310-2* | - | 1310 | 1550 | -8 | 0 | -30 | -3 | 3 | 22 |
SM-SF | 40km | - | 9311-2* | - | 1550 | 1310 | -8 | 0 | -30 | -3 | 3 | 22 |
100BASE-FX SFP (1) | - | - | - | 9319-0 | - | - | - | - | - | - | - | - |
100BASE-FX SFP (2) | - | - | - | 9319-1 | - | - | - | - | - | - | - | - |
Type | Distance | Fiber Connector Type (qty) | Tx λ (nm) | Rx λ (nm) | Min. Tx Power (dBm) | Max. Tx Power (dBm) | Min. Rx Power (dBm) | Max. Rx Power (dBm) | Min Attenu- ation (dB) | Link Budget (dB) | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|
ST (1) | SC (1) | SFP (1 or 2) | ||||||||||
FPoE+/S Media Converter (IEEE 802.3at) | ||||||||||||
MM | 5km | 9320-0 | 9322-0 | - | 1310 | 1310 | -24 | -14 | -31 | -14 | - | 7 |
SM | 30km | 9321-1 | 9323-1 | - | 1310 | 1310 | -15 | -8 | -31 | -8 | - | 16 |
SM | 60km | 9321-2 | 9323-2 | - | 1310 | 1310 | -5 | 0 | -31 | -3 | 3 | 26 |
SM | 120km | - | 9323-3 | - | 1550 | 1550 | -5 | 0 | -31 | -3 | 3 | 26 |
SM-SF | 20km | - | 9330-1* | - | 1310 | 1550 | -15 | -5 | -30 | -3 | - | 15 |
SM-SF | 20km | - | 9331-1* | - | 1550 | 1310 | -15 | -5 | -30 | -3 | - | 15 |
SM-SF | 40km | - | 9330-2* | - | 1310 | 1550 | -8 | 0 | -30 | -3 | 3 | 22 |
SM-SF | 40km | - | 9331-2* | - | 1550 | 1310 | -8 | 0 | -30 | -3 | 3 | 22 |
100BASE-FX SFP (1) | - | - | - | 9339-0 | - | - | - | - | - | - | - | - |
100BASE-FX SFP (2) | - | - | - | 9339-1 | - | - | - | - | - | - | - | - |
* When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
Consult factory for availability of extended temperature models and other fiber options.
Order the appropriate SFPs separately. Visit the Omnitron Optical Transceivers web page.
For more information on the 19” rack-mount shelf see: 19” Rack Mount web page