iConverter Modular T1/E1 Multiplexer
Jellemzők
- Modular system multiplexes up to sixteen independent T1/E1 circuits and one 10/100/1000 copper Ethernet onto a fiber link
- Multiple groups of modules are supported in a chassis
- Optional Ethernet connectivity to adjacent module
- Remotely-managed configuration and testing enables rapid deployment
- Manageable via SNMP with Omnitron’s NetOutlook® Management Software or third party software
- CLI management interface via TELNET or serial port
- Commercial (0 to 50º C ) and wide (-40 to 60º C) operating temperature ranges
- Lifetime Warranty and free 24/7 Technical Support
iConverter TM3 Fiber Transport Modules
- Small Form Pluggable (SFP) or fixed fiber transceivers, in standard and CWDM wavelengths
- Multimode, single-mode dual fiber and single-mode single-fiber options
iConverter 4xT1/E1 MUX Modules
- In band (FAC2) T1 loop-back
- Out of band local loop-back on the copper and fiber ports, remote fiber loop-back and circuit test modes
- Supports balanced T1/E1 or unbalanced E1
- Configurable alarm relay contacts for audio/visual fault notification
- 24 hour T1/E1 statistic logging
- Optional external I/O clock port
Alkalmazás
Mobile Backhaul & Delivery of Ethernet Business Services
The iConverter Modular T1/E1 Multiplexer transports up to sixteen T1/E1 circuits and 10/100/1000 Ethernet over a fiber transport link or CWDM channel. This flexible and scalable system is comprised of an iConverter TM3 fiber transport module, and one or more iConverter 4xT1/E1 MUX modules installed in a 2, 5 or 19-module chassis.
Each iConverter TM3 module and up to four contiguous iConverter 4xT1/E1 MUX modules combine to form a MUX group. A MUX group can connect with another MUX group at the opposite end of a dedicated fiber link. A MUX group can also interoperate with a Managed iConverter fixed-configuration T1/E1 Multiplexer.
Multiple MUX groups can be installed in a chassis, enabling high-density, star-topology deployments.
The iConverter Modular T1/E1 Multiplexer system is designed for service provider, enterprise, government and energy/utility networks.
Service provider and utility applications include mobile backhaul and business services that require delivery of multiple T1/E1s and/or Ethernet. High density configurations save rack space at the Central Office, and compact designs provide cost-effective demarcation at the cell tower or customer premises.
Enterprise and government applications include extension of multiple T1/E1 circuits from a service provider demarcation point, and building-to-building PBX connectivity.
The TM3 transport module has two Ethernet backplane ports for providing additional Ethernet connectivity to adjacent modules . A common application of this feature is to combine a 4-Port switch module in the adjacent slot to provide an solution with four additional 10/100/1000 ports.
The iConverter TM3 fiber transport module is available with fixed-fiber or Small Form Pluggable (SFP) transceivers. This enables easy adaptability to different fiber types (multimode, single-mode, single-mode single fiber), distances and wavelengths (standard and CWDM).
The iConverter 4xT1/E1 MUX module supports four copper RJ-48 ports for balanced T1/E1 applications. Adapter cables are available to convert each RJ-48 interface to a BNC interface for unbalanced E1 transport applications.
The 4xT1/E1 MUX module features an optional external clock port that can be configured as a clock input or output. As an input, the port can be connected to an external clock source, such as a GPS receiver, to provide a common clock for the module. As an output, the port can provide the recovered T1/E1 clock from port 1 to other TDM equipment at the site.
Paraméterek
Model Type | iConverter TM3 Transport Module | |
Protocols | 10BASE-T, 100BASE-TX, 1000BASE-T, 100BASE-FX, 1000BASE-X Ethernet |
|
Compliance | UL, CE, FCC Class A, NEBS 3 Compliant | |
IP-Based Management | Telnet, SNMPv1, SNMPv2c, SNMPv3 | |
Frame Size | Up to 10,240 byte frames | |
Copper Connectors | Ethernet: RJ-45 | |
Fiber Connectors | SFP Model: Dual Fiber Model: Single-Fiber Model: |
Any MSA standard SFP SC, ST SC |
Serial Connector | Mini DIN-6 female Mini DIN-6 male to DB-9 female adapter included |
|
Dimensions | W: 0.85” x D: 4.5” X H: 2.8” | |
Weight | 8oz. | |
Humidity | 5 to 95% (non-condensing) | |
Altitude | -100m to 4000m | |
Power | Typical input power requirements: 1.6A @ 3.3VDC Connector: Power supplied by backplane |
|
Temperature | Standard Operating: Wide Operating: Storage: |
0 to 50º C -40 to 60º C -40 to 80º C |
MTBF (hrs) | 340,000 hrs |
Model Type | iConverter 4xT1/E1 MUX Module | |
Protocols | ANSI: T1.403, T1.102 AT&T: T62411, ITU: G.703, G.704, G.706, G.736, G.775, G.823, G.824, G.8261 ETSI: ETS 300 166 | |
Compliance | UL, CE, FCC Class A, NEBS 3 Compliant | |
Connectors | T1/E1: RJ-48 | |
Clock I/O Port (8486-4 only) | Input: 10 MHz, 1.544 MHz, or 2.048 MHz Output: Recovered clock from Port 1 |
|
Dimensions | W: 0.85” x D: 4.5” X H: 2.8” | |
Weight | 8oz. | |
Humidity | 5 to 95% (non-condensing) | |
Altitude | -100m to 4000m | |
Power | Typical input power requirements: 1.6A @ 3.3VDC Connector: Power supplied by backplane |
|
Temperature | Standard Operating: Wide Operating: Storage: |
0 to 50º C -40 to 60º C -40 to 80º C |
MTBF (hrs) | 410,000 hrs |
Port Configuration | Fiber Type | Distance | Wavelength | P1 Connector Type | Tx Lambda (nm) | Rx Lambda (nm) | Min. Tx Power (dBm) | Max. Tx Power (dBm) | Min. Rx Sensitivity (dBm) | Max. Rx Power (dBm) | Min Att | Link Budget (dB) | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P1 | P2 | (nm) | ST | SC | SFP | ||||||||||
FF | UTP | MM-DF | 220/550m | 850 | 2420-0-T | 2422-0-T | - | 850 | 850 | -10 | -4 | -17 | -3 | - | 7 |
FF | UTP | SM-DF | 12km | 1310 | 2421-1-T | 2423-1-T | - | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | - | 10 |
FF | UTP | SM-DF | 34km | 1310 | 2421-2-T | 2423-2-T | - | 1310 | 1310 | -5 | 0 | -23 | -3 | 3 | 18 |
FF | UTP | SM-DF | 80km | 1550 | - | 2423-3-T | - | 1550 | 1550 | -5 | 0 | -23 | -3 | 3 | 18 |
FF | UTP | SM-DF | 110km | 1550 | - | 2423-4-T | - | 1550 | 1550 | 0 | 5 | -24 | -3 | 8 | 24 |
FF | UTP | SM-DF | 140km | 1550 | - | 2423-5-T | - | 1550 | 1550 | 2 | 5 | -28 | -8 | 13 | 30 |
FF | UTP | SM-SF | 20km | 1310/1550 | - | 2430-1-T* | - | 1310 | 1550 | -9.5 | -3 | -20 | -3 | - | 10.5 |
FF | UTP | SM-SF | 20km | 1550/1310 | - | 2431-1-T* | - | 1550 | 1310 | -9.5 | -3 | -20 | -3 | - | 10.5 |
FF | UTP | SM-SF | 40km | 1310/1550 | - | 2430-2-T* | - | 1310 | 1550 | -3 | 0 | -20 | -3 | 3 | 17 |
FF | UTP | SM-SF | 40km | 1550/1310 | - | 2431-2-T* | - | 1550 | 1310 | -3 | 0 | -20 | -3 | 3 | 17 |
SFP | UTP | - | - | - | - | - | 2439-0-T** | Order the appropriate SFPs separately. Visit the Optical Transceivers web page. |
|||||||
SFP | SFP | - | - | - | - | - | 2499-0-T** | Order the appropriate SFPs separately. Visit the Optical Transceivers web page. |
FF - Fixed Fiber, UTP - Unshielded Twisted Pair, SFP - Small Form Pluggable Transceiver
*When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
**Order fiber or copper SFPs separately
To order a wide temperature (-40 to 60°C) TM3 module, add a “W” to the end of the model number.
iConverter 4xT1/E1 MUX Module | ||
---|---|---|
4 T1/E1 | 4 T1/E1 with Clock I/O | |
Model Number | 8485-4 | 8486-4 |
To order a wide temperature (-40 to 60°C) 4xT1/E1 MUX module, add a “W” to the end of the model number.
Accessories | |
---|---|
9140-3 | RJ-48 Alarm Breakout Cable |
9142-1 | 50 OHM mini-coax plug to BNC plug adapter cable, 6” |