Fujikura 70S Fusion Splicer
The Fujikura 70S fusion splicer is the fastest fusion splicer in the world. Tovább »
iConverter 4xT1/E1 MUX
Unmanaged T1/E1 Multiplexer
Jellemzők
- Multiplexes four independent T1 or E1 channels from copper links into one fiber link
- Supports optional multiplexed 10/100 copper Ethernet port with T1/E1 circuits
- Small Form Pluggable (SFP) transceivers or fixed-fiber connectors
- Supports multimode, single-mode dual fiber, single-mode single-fiber, in standard and CWDM wavelengths
- Locally configurable via DIP-switches
- Configurable alarm relay contacts for audio/visual fault notification
- Supports local and remote fiber and copper loop-back modes
- Commercial (0 to 50º C) and wide (-40 to 60º C) operating temperature ranges
- Lifetime Warranty and free 24/7 Technical Support
Alkalmazás
adatlapThe iConverter 4xT1/E1 MUX multiplexs up to four T1/E1s and an optional 10/100 Ethernet onto a fiber optic transport link. The unmanaged T1/E1 Multiplexer provides an easy to use and cost effective multi-service solution.
The iConverter 4xT1/E1 MUXes operate in a back-to-back configuration, with one multiplexer at each end of the fiber link. This easy-to-use and cost-effective MUX transports services from legacy TDM equipment across long distances that exceed the reach or capacity of copper. This includes applications such as T1/E1 extension, mobile backhaul and building-to-building PBX connectivity, making it ideal for Enterprise, Telecom and Utility industries.
The 4xT1/E1 MUX supports fixed-fiber and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. The 4xT1/E1 MUX supports multimode, single-mode, single-mode single-fiber, in standard and CWDM wavelengths.
The 4xT1/E1 MUX supports standard T1, E1 and Primary Rate Interface (PRI), voice or data. The MUX also supports AMI, B8ZS and HDB3 line codes. DIP-switches provide easy configuration of the T1/E1 line codes and line build-out.
The copper interfaces feature four RJ-48 connectors for balanced T1/E1 applications. An optional adapter cable is available to convert each RJ-48 interface to a BNC interface for unbalanced E1 transport applications.
The 4xT1/E1 MUX features user-selectable local loop-back on both the copper and fiber ports, remote fiber loop-back and circuit test modes. This functionality facilitates diagnosis of the remote unit, and minimizes the need for test equipment and support personnel at each end of a link. Alarm relay and LEDs provide fault notification for loss of power, LOS and AIS.
The 4xT1/E1 MUX is a compact, unmanaged standalone unit available in both AC and DC models. The AC model accepts AC power input ranging from 100VAC to 240VAC, 50/60Hz, while the DC model accepts 18VDC to 60VDC.
Paraméterek
| Model Type | UnmanagediConverter 4xT1/E1 MUX |
| Protocols (TDM) | ANSI: T1.403, T1.102, AT&T: T62411, ITU: G.703, G.704, G.706, G.736, G.775, G.823, G.824, G.8261 ETSI: ETS 300 166 |
| Protocols (Ethernet) | 10BASE-T, 100BASE-TX, 100BASE-FX with 2044 bytes max. frame size |
| Copper Connectors | RJ-45/RJ-48 |
| Fiber Connectors SFP: Dual Fiber: Single-Fiber: |
LC SC, ST, LC MT-RJ SC |
| Controls | UTP Crossover, CableType / Distance, Loop, Fiber AIS, UTP AIS, Fiber Optic Test |
| LED Displays | Power, Test, RJ-45/RJ-48 Link, Fiber Optic Link |
| AC Power Input power requirements: Connector: |
100 to 240VAC 50/60Hz 0.5A @ 120VAC IEC320 |
| DC Power Input power requirements: Connector: |
18 to 60VDC 2.0A @ - 48VDC 3-pin terminal |
| Dimensions | W: 6.7” x D: 5.51” x H: 1.87” |
| Weight | 2.5 lbs |
| Compliance | UL, CE, FCC Class A, NEBS 3 Compliant |
| Temperature | |
| Standard Operating: | 0 to 50º C |
| Wide Operating: | -40 to 60º C |
| Storage: | -40 to 80º C |
| Humidity | 5 to 95% (non-condensing) |
| Altitude | -100m to 4000m |
| MTBF (hrs) | |
| AC Model | 150,000 |
| DC Model | 165,000 |
| Type | Distance | Connector Type | Tx λ [nm] | Rx λ [nm] | Min. Tx Power [dBm] | Max. Tx Power [dBm] | Min. Rx Power [dBm] | Max. Rx Power [dBm] | Min Attenuation (dB) | Link Budget [dB] | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ST | SC | MT-RJ | LC | SFP | ||||||||||
| SFP | - | - | - | - | - | 8839-0** | - | - | - | - | - | - | - | - |
| MM/DF | 5km | 8820-0 | 8822-0 | 8824-0 | 8826-0 | - | 1310 | 1310 | -24 | -14 | -31 | -14 | - | 7 |
| SM/DF | 30km | 8821-1 | 8823-1 | 8825-1 | 8827-1 | - | 1310 | 1310 | -15 | -8 | -31 | -8 | - | 16 |
| SM/DF | 60km | - | 8823-2 | - | 8827-2 | - | 1310 | 1310 | -5 | 0 | -31 | -3 | 3 | 26 |
| SM/DF | 120km | - | 8823-3 | - | 8827-3 | - | 1550 | 1550 | -5 | 0 | -31 | -3 | 3 | 26 |
| SM/SF | 20km | - | 8830-1* | - | - | - | 1310 | 1550 | -15 | -5 | -30 | -3 | - | 15 |
| SM/SF | 20km | - | 8831-1* | - | - | - | 1550 | 1310 | -15 | -5 | -30 | -3 | - | 15 |
| SM/SF | 40km | - | 8830-2* | - | - | - | 1310 | 1550 | -8 | 0 | -30 | -3 | 3 | 22 |
| SM/SF | 40km | - | 8831-2* | - | - | - | 1550 | 1310 | -8 | 0 | -30 | -3 | 3 | 22 |
* When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
** User 155 Mbps (FE, OC3/STM-1) SFP.
Consult the factory for other configurations
| Adapter Cable | |
|---|---|
| 9140-3 | RJ-48 to BNC 3 ft cable |
