iConverter 100FF

100BASE-FX Single-Mode to Multimode Managed Fiber Converter

iConverter 100FF

 

PDF_014_36x36.jpgadatlap

Jellemzők

  • 100BASE-FX single-mode to multimode fiber converter
  • Supports multimode, single-mode and single-fiber with SC and ST connectors
  • Supports distances up to 120km or longer*
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
  • Management is available with the addition of a management module to the chassis
  • SNMP management via NetOutlook ® provides real-time port and module information, remote parameter configuration and trap notification
  • Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
  • LED displays for immediate visual status of each port
  • Conforms to IEEE 802.3 and 100BASE-FX specifications
  • Lifetime Warranty and free 24/7 Technical Support

 

*Contact Omnitron

Alkalmazás

The iConverter 100FF managed media converter provides multimode to single-mode and dual fiber to single fiber conversion, and is a cost-effective solution for extending fiber network distances.

iConverter 100FF models are available with multimode, single-mode and single-fiber options. The single-mode fiber port supports ST or SC connectors and distances up to 120km. The multimode fiber port supports ST or SC connectors and distances up to 5km.

The 100FF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.

The iConverter 100FF is available as a compact, unmanaged standalone unit, or as a chassis plug-in module that can be managed with a management module installed in the chassis. The hot-swappable plug-in module can be mounted in a high-density 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.

The standalone 100FF can be wall-mounted and is DC powered. It can be ordered with an external AC/DC power adapter, or it can be directly powered using a 2-pin terminal connector.

Paraméterek

Model Type iConverter OC3FF
Protocols 100BASE-FX
Compliance UL, FCC Class A, CE, NEBS Level 3
Fiber Connectors SC, ST, Single-Fiber SC
Controls LP, RFD
LED Displays Power, FO link (2)
Dimensions Plug-in:
Standalone:
W 0.85” x D 4.5” x H 2.8”
W 3.8” x D 4.8” x H 1.0”
Weight Plug-in:
Standalone
without Power Adapter:
Standalone
with Power Adapter:
8 oz.

1.0 lb.

1.5 lb.
DC Power Connector Plug-in:
Standalone:
Power supplied by backplane
2.5mm Barrel Connector or 2 Pin Terminal Connector
DC Power Requirement (typical) Plug-in:
Standalone:
0.5A @ 3.3VDC
5 - 32VDC 0.3A @ 9VDC (1.0A max)
AC Power Adapter [US] Plug-in:
Standalone:
N/A
100 - 120VAC/60Hz 0.05A @ 120VAC
AC Power Adapter [Universal] Plug-in:
Standalone:
N/A
100 - 240VAC/50 to 60Hz 0.05A @ 120VAC
Temperature Standard:
Wide:
Storage:
Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4000m
MTBF (hrs) Plug-in:
Standalone
with US Power Adapter:
Standalone
with Universal Adapter:
1,600,000

250,000

100,000

100FF_011_670x265.jpg

PortFiber TypeDistanceConnector TypeWavelength [nm]Min. Tx Power (dBm)Max. Tx Power (dBm)Min. Rx SensitivityMax. Rx Sensitivity (dBm)Min. Attenuation (dB)Link Budget (dB)
ST/ST, ST/SC SFSC/SC, SC/SC SF
Port 1 MM 2km - 8622-61 850 -10 -4 -24 -3 - 14
Port 2 SM 30km 1310 -15 -8 -31 -8 - 16
Port 1 MM 5km 8620-1 8622-1 1310 -24 -14 -31 -14 - 7
Port 2 SM 30km 1310 -15 -8 -31 -8 - 16
Port 1 MM 5km 8620-2 8622-2 1310 -24 -14 -31 -14 - 7
Port 2 SM 60km 1310 -5 0 -31 -3 3 26
Port 1 MM 5km - 8622-3 1310 -24 -14 -31 -14 - 7
Port 2 SM 120km 1550 -5 0 -31 -3 3 26
Port 1 MM 5km 8630-1 8634-1 1310 -24 -14 -31 -14 - 7
Port 2 SM / SF 20km Tx 1310
Rx 1550
-15 -5 -30 -3 - 15
Port 1 MM 5km 8631-1 8635-1 1310 -24 -14 -31 -14 - 7
Port 2 SM / SF 20km Tx 1550
Rx 1310
-15 -5 -30 -3 - 15
Port 1 MM 5km 8630-2 8634-2 1310 -24 -14 -31 -14 - 7
Port 2 SM / SF 40km Tx 1310
Rx 1550
-8 0 -30 -3 3 22
Port 1 MM 5km 8631-2 8635-2 1310 -24 -14 -31 -14 - 7
Port 2 SM / SF 40km Tx 1550
Rx 1310
-8 0 -30 -3 3 22
Port 1 SM 30km 8632-1 8636-1 1310 -15 -8 -31 -8 - 16
Port 2 SM / SF 20km Tx 1310
Rx 1550
-15 -5 -30 -3 - 15
Port 1 SM 30km 8633-1 8637-1 1310 -15 -8 -31 -8 - 16
Port 2 SM / SF 20km Tx 1550
Rx 1310
-15 -5 -30 -3 - 15
Port 1 SM 30km 8632-2 8636-2 1310 -15 -8 -31 -8 - 16
Port 2 SM / SF 40km Tx 1310
Rx 1550
-8 0 -30 -3 3 22
Port 1 SM 30km 8633-2 8637-2 1310 -15 -8 -31 -8 - 16
Port 2 SM / SF 40km Tx 1550
Rx 1310
-8 0 -30 -3 3 22

 
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.

Chassis and Mounting Options Ordering Table

 19-Module5-Module2-Module1-Module
ConfigurationAC
(60 watts)
AC
(120 watts)
24VDC48VDCAC24VDC48VDCAC18-60DCUS ACUNIV AC
One (1) Power Supply 8200-1 8201-1 8206-1 8205-1 8220-1 8226-1 8225-1 8230-0 8235-0 8240-1 8240-2
One (1) Power Supply with Dying Gasp Support - - - - - - - 8230-1 8235-1 8241-1 8241-2
Two (2) Power Supplies 8200-2 8201-2 8206-2 8205-2 8220-2 8226-2 8225-2 - - 8245-111* 8245-112*
Three (3) Power Supplies 8200-3 8201-3 8206-3 8205-3 - - - - - - -
Spare Power Supply 8200-9 8201-9 8206-9 8205-9 8220-9 8226-9 8225-9 - - - -
23" Rack Mounting Kit 8091-2 8091-2 8091-2 8091-2 8092-2 8092-2 8092-2 - - - -
Blank Module Panel 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 - -
Wall Mounting Hardware Kit -   - - - - - 8249-0 8249-0 8249-0 8249-0
1U 19" Rack Mount Shelf - - - - - - - 8260-0 8260-0 8260-0 8260-0
DIN Rail Mounting Kit -   - - - - - - - 8250-0 8250-0

 
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.