Fujikura 70S Fusion Splicer
The Fujikura 70S fusion splicer is the fastest fusion splicer in the world. Tovább »
iConverter 10FL/T
adatlapJellemzők
- The iConverter 10/FLT is an IEEE 802.3 compatible 10BASE-T UTP to 10BASE-FL fiber converter
- Supports multimode, single-mode, and single-fiber with ST, SC, LC and MT-RJ connectors
- UTP port automatically supports Full or Half-Duplex 10Mbps Ethernet
- UTP crossover switch eliminates the need for a crossover cable
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Lifetime Warranty and free 24/7 Technical Support
Alkalmazás
The iConverter 10FL/T managed media converters are members of the modular iConverter product family, and provide 10BASE-T UTP to 10BASE-FL fiber conversion.
The iConverter 10FL/T models are available with multimode, single-mode and single-fiber options. They support ST, SC, LC and MT-RJ connectors. The UTP port supports 10BASE-T in either Full or Half-Duplex mode. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations.
The 10FL/T features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.
iConverter 10FL/T modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
Paraméterek
| Model Type | 10FL/T |
| Protocols | 10BASE-FL, 10 BASE-T |
| UTP Connectors | RJ-45 |
| Fiber Connectors | SC, ST, LC, MT-RJ, Single-Fiber SC |
| Controls | LP, RFD |
| LED Displays | Power, F/O Link, UTP Link |
| Dimensions | W:0.85" x D:4.5" x H:2.8" |
| Weight | 8 oz. |
| Compliance | UL, CE, FCC Class A, NEBS 3 Level 3 |
| Power Requirement | 0.5A @ 3.3VDC (typical) |
| Temperature | Standard: 0 to 50º C Wide: -40 to 60º C Storage: -40 to 80º C |
| Humidity | 5 to 95% (non-condensing) |
| Altitude | -100m to 4000m |
| MTBF (hrs) | 830,000 |
| Model Type | Fiber / Media Type | Distances | Connector Type | Tx λ (nm) | Rx λ (nm) | Min. Tx Power (dBm) | Max. Tx Power (dBm) | Min. Rx Sense (dBm) | Max. Rx Sense (dBm) | Link Budget (dBm) | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ST | SC | MT-RJ | LC | ||||||||||
| 10FL/T Dual Fiber | MM | 2km | 8300-0 | 8302-0 | - | - | 850 | 850 | -21 | -11 | -31 | -11 | 10 |
| MM | 5km | 8300-1 | - | 8304-1 | - | 1310 | 1310 | -24 | -14 | -31 | -14 | 7 | |
| SM | 30km | 8301-1 | 8303-1 | 8305-1 | 8307-1 | 1310 | 1310 | -15 | -8 | -31 | -8 | 16 | |
| SM | 60km | 8301-2 | 8303-2 | - | 8307-2 | 1310 | 1310 | -5 | 0 | -31 | -3* | 26 | |
| SM | 120km | - | 8303-3 | - | 8307-3 | 1550 | 1550 | -5 | 0 | -31 | -3* | 26 | |
| 10FL/T Single Fiber | SM | 20km | - | 8310-1 | - | - | 1310 | 1550 | -15 | -5 | -30 | -3 | 15 |
| SM | 40km | - | 8310-2 | - | - | 1310 | 1550 | -8 | 0 | -30 | -3* | 22 | |
| SM | 20km | - | 8311-1 | - | - | 1550 | 1310 | -15 | -5 | -30 | -3 | 15 | |
| SM | 40km | - | 8311-2 | - | - | 1550 | 1310 | -8 | 0 | -30 | -3* | 22 | |
For wide temperature (-40 to 60º C) modules, add a "W" to the end of the model number. Consult factory for other configurations and extended temperature (-40 to +75º C) modules.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.
Chassis and Mounting Options Ordering Table
| 19-Module | 5-Module | 2-Module | 1-Module | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Configuration | AC (60 watts) | AC (120 watts) | 24VDC | 48VDC | AC | 24VDC | 48VDC | AC | 18-60DC | US AC | UNIV AC |
| One (1) Power Supply | 8200-1 | 8201-1 | 8206-1 | 8205-1 | 8220-1 | 8226-1 | 8225-1 | 8230-0 | 8235-0 | 8240-1 | 8240-2 |
| One (1) Power Supply with Dying Gasp Support | - | - | - | - | - | - | - | 8230-1 | 8235-1 | 8241-1 | 8241-2 |
| Two (2) Power Supplies | 8200-2 | 8201-2 | 8206-2 | 8205-2 | 8220-2 | 8226-2 | 8225-2 | - | - | 8245-111* | 8245-112* |
| Three (3) Power Supplies | 8200-3 | 8201-3 | 8206-3 | 8205-3 | - | - | - | - | - | - | - |
| Spare Power Supply | 8200-9 | 8201-9 | 8206-9 | 8205-9 | 8220-9 | 8226-9 | 8225-9 | - | - | - | - |
| 23" Rack Mounting Kit | 8091-2 | 8091-2 | 8091-2 | 8091-2 | 8092-2 | 8092-2 | 8092-2 | - | - | - | - |
| Blank Module Panel | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | - | - |
| Wall Mounting Hardware Kit | - | - | - | - | - | - | 8249-0 | 8249-0 | 8249-0 | 8249-0 | |
| 1U 19" Rack Mount Shelf | - | - | - | - | - | - | - | 8260-0 | 8260-0 | 8260-0 | 8260-0 |
| DIN Rail Mounting Kit | - | - | - | - | - | - | - | - | 8250-0 | 8250-0 | |
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet
